Fortinet white logo
Fortinet white logo

FortiGate

FortiGate

Follow this procedure on the FortiPresence VM and FortiGate GUIs to enable and configure location services.

  1. On the FortiGate GUI navigate to WiFi and Switch Controller > FortiAP Profiles .
  2. Select and double-click a specific FortiAP profile, scroll down to the FortiPresence section.
  3. Enable Location Services; configure the mode as Foreign Channels Only/Foreign and Home Channels.
  4. Enter the Project name and Password, (Project Name and Project Secret Key respectively copied from the FortiPresence VM GUI - Admin > Settings > Discovered APs).
  5. Enter the FortiPresence server IP - (Application server IP address) and FortiPresence server port - 4013.

In the FortiPresence VM GUI, Admin > Settings > Discovered APs, refresh to view the access points discovered by FortiGate.

Note: Repeat this procedure for every FortiAP profile in case you have multiple profiles.

FortiGate

FortiGate

Follow this procedure on the FortiPresence VM and FortiGate GUIs to enable and configure location services.

  1. On the FortiGate GUI navigate to WiFi and Switch Controller > FortiAP Profiles .
  2. Select and double-click a specific FortiAP profile, scroll down to the FortiPresence section.
  3. Enable Location Services; configure the mode as Foreign Channels Only/Foreign and Home Channels.
  4. Enter the Project name and Password, (Project Name and Project Secret Key respectively copied from the FortiPresence VM GUI - Admin > Settings > Discovered APs).
  5. Enter the FortiPresence server IP - (Application server IP address) and FortiPresence server port - 4013.

In the FortiPresence VM GUI, Admin > Settings > Discovered APs, refresh to view the access points discovered by FortiGate.

Note: Repeat this procedure for every FortiAP profile in case you have multiple profiles.