Admin settings
Go to Admin > Settings to change the general administrative settings for FortiPortal. The following figure shows the settings page (with authentication set to local):
The following table describes the settings:
|
Settings |
Guidelines |
||
|---|---|---|---|
|
Administration Settings |
|||
|
FPC Data Store Size |
Required. Amount of database storage (in GB) to reserve for the portal DB |
||
|
Session Timeout |
Required. Timeout for user sessions on the Administrative or Customer web interfaces. The default is 30 minutes. The range is 15-3240 minutes. |
||
|
Trusted Hosts |
Select Enable or Disable. When enabled, you can create a whitelist of originating IP subnetworks; only log-in requests from these subnetworks will be allowed. The system also provides a blacklist, for blocking rogue log-in attempts. |
||
|
Email Settings |
|||
|
SMTP Server |
Required. URL of the SMTP serve from which FortiPortal sends emails |
||
|
Email From |
Required. Email address. Emails sent from FortiPortal will originate from this address. |
||
|
Port |
Required. Email server port. The default value is 25. |
||
|
Authentication |
Enable or disable authentication. If you enable authentication, enter a user name and password. You can use special characters in the user name. |
||
|
Remote Log Server |
|
||
|
Primary Server |
Primary log server IP address |
||
|
Primary Port |
Primary log server port number (mandatory if the server address is supplied) |
||
|
Secondary Server |
Secondary log server IP address |
||
|
Secondary Port |
Secondary log server port number (mandatory if server address supplied) |
||
|
Other |
|
||
|
Load Balancer Domain/IP Address |
Load balancer IP address or domain name, if you have configured multiple instances of the Apache Tomcat server. |
||
|
Load Balancer Port |
Load balancer port number (required if you specified a load balancer IP address, not required for a domain name). The default value is 443. |
||
|
Max Reports Allowed |
Maximum number of reports that can be defined for this customer. This number includes customer-defined reports and also any reports that the administrator has defined for this customer. |
||
|
Alert Email From |
Alert emails will be sent from this email address. |
||
|
Alert Email To |
Alert emails will be sent to this email address. |
||
|
Language |
Desired language (default, English) |
||
|
Time Zone |
Select the appropriate time zone to use. |
||
|
TLS/SSL Versions |
Select which TLS/SSL versions are used. |
||
|
User Authentication |
|||
|
Authentication Access |
Select Local or Remote. If the authentication access is local, the administrator and customer user log-in credentials are checked in the local user databases. With the local option, you must add an SP user entry for each administrative user, and a customer user for each end-customer user. If the authentication access is remote, the administrator and customer user log-in credentials are checked in the remote RADIUS server or FortiAuthenticator user database. Local customer users cannot be used when remote authentication is selected. See Remote authentication using FortiAuthenticator, RADIUS server configuration , and Remote authentication - SSO .
|
||
