Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:


Table of Contents

Change log

Date Change Description
8-19-2022 Initial release.
9-2-2022 Removed Known Issues: 710416, 677628, 675180, 646580, 610581, 609976, 609046, 522468, 812930, 814631, 828242
9-2-2022

Removed and moving to Administration Guide:

  • Removing a device from the L2 Wired Devices or L2 Wireless Devices Group does not disable L2 (Hosts) Polling under the Polling tab in Topology.

  • The "Set all hosts 'Risk State' to 'Safe'" button changes the status of all hosts marked At-Risk to Safe. However, the status of the individual scans for each host remain unchanged.

  • System > Settings > Updates > Operating System will only record and display dates of OS updates that are completed through the Administrative UI. If Operating System updates are run via command line using the "yum" tool, the update is not recorded. Resolution: Execute Operating System Updates through the Administrative UI in order to maintain update history.

9-2-2022 Added Known Issues: 695435, 830581, 830932, 832313, 833302, 833305, 834461, 835143, 835149, 835405, 836137, 836146, 836435, 836606, 837938
9-2-2022 Removed Device Consideration: At this time, integration with Ubiquiti AirOS AP is not supported. Ubiquiti AirOS AP does not have the necessary capabilities to allow for full integration with FortiNAC. The limitations are as follows: - No support for external MAC Authentication using RADIUS. - Limited CLI and SNMP capability. No ability to dynamically modify access parameters (ie. VLANs) for active sessions.

10-3-2022

Added Known Issues: 845163, 845003, 845000, 842370, 842280, 842112, 841907, 840796, 838525, 835782, 833735, 833327

Added Device Support Considerations: 845035, 843509, 842181, 836831

10-18-2022

Changed Known Issue: 842112 to 842122.

Added Known Issues: 699106, 834094/834089/845493/845505, 845412, 845930, 845935, 848274, 849140, 849497

Added Device Support Considerations: 829009, 846782

10-31-2022

Changes to System Update Settings

Change log

Date Change Description
8-19-2022 Initial release.
9-2-2022 Removed Known Issues: 710416, 677628, 675180, 646580, 610581, 609976, 609046, 522468, 812930, 814631, 828242
9-2-2022

Removed and moving to Administration Guide:

  • Removing a device from the L2 Wired Devices or L2 Wireless Devices Group does not disable L2 (Hosts) Polling under the Polling tab in Topology.

  • The "Set all hosts 'Risk State' to 'Safe'" button changes the status of all hosts marked At-Risk to Safe. However, the status of the individual scans for each host remain unchanged.

  • System > Settings > Updates > Operating System will only record and display dates of OS updates that are completed through the Administrative UI. If Operating System updates are run via command line using the "yum" tool, the update is not recorded. Resolution: Execute Operating System Updates through the Administrative UI in order to maintain update history.

9-2-2022 Added Known Issues: 695435, 830581, 830932, 832313, 833302, 833305, 834461, 835143, 835149, 835405, 836137, 836146, 836435, 836606, 837938
9-2-2022 Removed Device Consideration: At this time, integration with Ubiquiti AirOS AP is not supported. Ubiquiti AirOS AP does not have the necessary capabilities to allow for full integration with FortiNAC. The limitations are as follows: - No support for external MAC Authentication using RADIUS. - Limited CLI and SNMP capability. No ability to dynamically modify access parameters (ie. VLANs) for active sessions.

10-3-2022

Added Known Issues: 845163, 845003, 845000, 842370, 842280, 842112, 841907, 840796, 838525, 835782, 833735, 833327

Added Device Support Considerations: 845035, 843509, 842181, 836831

10-18-2022

Changed Known Issue: 842112 to 842122.

Added Known Issues: 699106, 834094/834089/845493/845505, 845412, 845930, 845935, 848274, 849140, 849497

Added Device Support Considerations: 829009, 846782

10-31-2022

Changes to System Update Settings