Endpoint compliance policies

Endpoint compliance polices are used to assess hosts and determine if they are safe. An endpoint compliance policy is composed of building blocks, including: a user/host profile and an endpoint compliance configuration. Refer to Implementation for information on the entire endpoint compliance feature.

When a host is evaluated and FortiNAC Manager determines that the host requires an endpoint compliance policy, the host and user are compared to the user/host profiles within each endpoint compliance policy starting with the first policy in the list. When a match is found, the endpoint compliance policy is applied. Once a policy is selected as a match for the host or user, the endpoint compliance configuration within the policy determines the treatment that the host receives. An endpoint compliance configuration specifies whether or not an agent is required and the scan parameters for scanning the host.

Endpoint compliance policies created on the FortiNAC Manager server will be ranked above global endpoint compliance policy created on the NCM. The rank of a local endpoint compliance policy can be adjusted above or below another local endpoint compliance policy, but cannot be ranked below a global endpoint compliance policy. The rank for a global endpoint compliance policy cannot be modified from the FortiNAC Manager server.

If the user/host does not match any policy, it is allowed to register with no scan and no policy.

There may be more than one endpoint compliance policy that is a match for this host/user; however, the first match found is the one that is used.

If you create a user/host profile with fields Where set to Any, Who/What by Group set to Any, Who/What by Attribute set to Any and When set to Always, it matches ALL users and hosts. This is essentially a Catch All profile. If this user/host profile is used in a policy, all policies below that policy are ignored when assigning a policy to a user or a host. To highlight this, policies below the policy with the catch all profile are grayed out and have a line through the data.

The best way to use a Catch All profile is to create a general policy with that profile and place it last in the list of policies.

Settings

Field	Definition
Rank Buttons	Moves the selected policy up or down in the list. Host connections are compared to Policies in order by rank.
Set Rank Button	Allows you to type a different rank number for a selected policy and immediately move the policy to that position. In an environment with a large number of policies, this process is faster than using the up and down Rank buttons. Rank can only be set on local policies, rank changes for global policies must be done at the NCM.
Table columns
Rank	Policy's rank in the list of policies. Rank controls the order in which host connections are compared to Policies.
Name	User defined name for the policy.
Endpoint Compliance Configuration	Contains the configuration for the Agent and Scan parameters that will be assigned if this Policy matches the connecting host and user. See Endpoint compliance configurations.
User/Host Profile	Contains the required criteria for a host or user, such as connection location, host or user group membership, host or user attributes or time of day. Host connections that match the criteria within the user/host profile are assigned the associated endpoint compliance configuration. See User/host profiles.
Where	The connection location specified in the user/host profile. The host must connect to the network on a device, port or SSID contained within one of the groups shown here to be a match. When set to Any, this field is a match for all hosts or users.
Who/What	Attributes A host or user must meet all parameters within a single filter, but is only required to match one filter in the list. The attribute must be known at the time of connection. See Filter example. RADIUS Attributes Used to match against endpoints pre- and post-authentication. Groups Any — Matches any group. Any Of — Matches any of the listed groups. Does not have to match everything, but has to match at least one group that has been selected. All Of — Has to match every group that's been selected. None Of — Has to match no group that's been selected.
When	The time frame specified in the selected User/Host Profile. The host must be on the network within this time frame to be a match. When set to Always this field is a match for all hosts or users.
Note	User specified note field. This field may contain notes regarding the data conversion from a previous version of FortiNAC Manager.
Last Modified By	User name of the last user to modify the policy.
Last Modified Date	Date and time of the last modification to this policy.
Right click options
Delete	Deletes the selected endpoint compliance policy.
Modify	Opens the Modify Endpoint Compliance Policy window for the selected policy.
Show Audit Log	Opens the admin auditing log showing all changes made to the selected item. For information about the admin auditing log, see Audit Logs. You must have permission to view the admin auditing log. See Add an administrator profile.
Buttons
Export	Exports the data displayed to a file in the default downloads location. File types include CSV, Excel, PDF, or RTF. See Export data.

Add or modify a policy

1. Select Policy & Objects.
2. Select Endpoint Compliance.
3. Click Add or select an existing policy and click Modify.
4. Click in the Name field and enter a name for this policy.
5. Select a User/Host Profile from the drop-down menu. You can use the icons next to the User/Host Profile field to add a new profile or modify the profile shown in the drop-down menu. Note that if you modify this profile, it is modified for all features that make use of the profile. Connecting hosts must match this User/Host Profile to be assigned the endpoint compliance configuration specified in the next step.
6. Select an Endpoint Compliance Configuration from the drop-down menu. You can use the icons next to the Endpoint Compliance Configuration field to add a new configuration or modify the configuration shown in the drop-down menu. Note that if you modify this configuration, it is modified for all features that make use of it. See Create or edit a configuration.
7. The Note field is optional.
8. Click OK to save your policy.