Local Winbind Configuration

9.2.0

Copy Link

Copy Doc ID 5bf21617-1bf0-11ec-8c53-00505692583a:670285

Download PDF

Local Winbind Configuration

FortiNAC is only capable of ntlm_auth in regards to winbind / mschap. Ensure your server is configured to allow.

Winbind is used to provide MSCHAPv2 authentication only. If using a different scheme, such as EAP-TTLS/PAP or EAP-TLS, configuration is not required.

Multiple Winbind instances can be created.

Navigate to Network > RADIUS > Winbind to configure winbind settings.
Service information can be edited from the main Winbind view while Winbind Domain Configuration Details can be configured by creating or selecting an existing winbind and selecting Edit.
Configure using the table below.

Service Info

Field	Description
Toggle Service Status	Enable/Disable processing of MSCHAPv2 authentication requests Note: FortiNAC must be joined to the domain before starting the Winbind service.
Status	Enabled Status: Displays Enabled if the service is configured to run on boot. Disabled if the service is not configured to run on boot Running Status: Displays Running if the service is running Stopped if the service is not running
Domain Status	Winbind Domain: Displays Not Joined if FortiNAC is not joined to any Active Directory through winbind Joined if FortiNAC is joined to the domain Domain Information: Displays the detailed information of the joined status of FortiNAC. This information may still show the previous join information if FortiNAC is no longer joined to the domain. In this case, the Winbind Domain will display “Not Joined” and the “Last Machine account password changed” date will show 1969 or 1970.
Details & Logs	Service Status: Displays full details of the service status. Warnings such as ‘Unknown value ‘xxxxxx’ in section ‘yyyyyy’ can be ignored. Service Log: Winbind log output Systemd Log: Systemd journal output. Useful if winbind will not start for some reason.

Winbind Domain Configuration Details

Field	Description
Name	Unique name used to identify the configuration. Only alphanumeric characters and underscore are allowed.
Local NetBIOS Name	NetBIOS name by which the FortiNAC Samba server is known. For High Availability configurations, this is the primary FortiNAC Samba server. Example: FortiNAC FQDN = hostname.corp.example.com, Local NetBIOS Name = "HOSTNAME" Note: the maximum length for a NetBIOS name is 15 characters.
Secondary (HA) NetBIOS Name	For FortiNAC High Availability configurations. NetBIOS name by which the secondary FortiNAC Samba server is known. Example: FortiNAC FQDN = hostname.corp.example.com, Local NetBIOS Name = "HOSTNAME" Note: the maximum length for a NetBIOS name is 15 characters. If High Availability is not used, this field is left blank.
Domain NetBIOS Name	NetBIOS name of your domain. This is the subdomain of the DNS domain name. Examples: Domain Controller Hostname = dc01.example.com, Domain NetBIOS Name = "EXAMPLE" Domain Controller Hostname = dc01.corp.example.com, Domain NetBIOS Name = "CORP"
Kerberos Realm Name	The DNS-style domain name. Example: “example.com”
Domain Controller Hostname	The name or address of the Active Directory domain controller to use to authenticate. Example: “dc01.example.com” Note: One server is allowed per domain.
Log Level	The log level for the Winbind service. Recommended value is “none”.
Join Domain	In order for Winbind authentication to work, FortiNAC must be joined to the domain. Configure the credentials for the account FortiNAC will use to join. Username: User name FortiNAC uses to join the domain. Examples: trusted_user or trusted_user@example.com Password: Password FortiNAC uses to join the domain

Field

Description

Toggle Service Status

Enable/Disable processing of MSCHAPv2 authentication requests
Note: FortiNAC must be joined to the domain before starting the Winbind service.

Status

Enabled Status: Displays
- Enabled if the service is configured to run on boot.
- Disabled if the service is not configured to run on boot
Running Status: Displays
- Running if the service is running
- Stopped if the service is not running

Domain Status

Winbind Domain: Displays

Not Joined if FortiNAC is not joined to any Active Directory through winbind
Joined if FortiNAC is joined to the domain

Domain Information: Displays the detailed information of the joined status of FortiNAC.

This information may still show the previous join information if FortiNAC is no longer joined to the domain. In this case, the Winbind Domain will display “Not Joined” and the “Last Machine account password changed” date will show 1969 or 1970.

Details & Logs

Service Status: Displays full details of the service status.
- Warnings such as ‘Unknown value ‘xxxxxx’ in section ‘yyyyyy’ can be ignored.

Service Log: Winbind log output
Systemd Log: Systemd journal output. Useful if winbind will not start for some reason.

Field

Description

Name

Unique name used to identify the configuration. Only alphanumeric characters and underscore are allowed.

Local NetBIOS Name

NetBIOS name by which the FortiNAC Samba server is known. For High Availability configurations, this is the primary FortiNAC Samba server.

Example: FortiNAC FQDN = hostname.corp.example.com, Local NetBIOS Name = "HOSTNAME"

Note: the maximum length for a NetBIOS name is 15 characters.

Secondary (HA) NetBIOS Name

For FortiNAC High Availability configurations. NetBIOS name by which the secondary FortiNAC Samba server is known.

Example: FortiNAC FQDN = hostname.corp.example.com, Local NetBIOS Name = "HOSTNAME"

Note: the maximum length for a NetBIOS name is 15 characters.

If High Availability is not used, this field is left blank.

Domain NetBIOS Name

NetBIOS name of your domain. This is the subdomain of the DNS domain name.
Examples:
Domain Controller Hostname = dc01.example.com, Domain NetBIOS Name = "EXAMPLE"
Domain Controller Hostname = dc01.corp.example.com, Domain NetBIOS Name = "CORP"

Kerberos Realm Name

The DNS-style domain name.
Example: “example.com”

Domain Controller Hostname

The name or address of the Active Directory domain controller to use to authenticate.
Example: “dc01.example.com”

Note: One server is allowed per domain.

Log Level

The log level for the Winbind service. Recommended value is “none”.

Join Domain

In order for Winbind authentication to work, FortiNAC must be joined to the domain. Configure the credentials for the account FortiNAC will use to join.

Username: User name FortiNAC uses to join the domain. Examples: trusted_user or trusted_user@example.com
Password: Password FortiNAC uses to join the domain

Administration Guide

Local Winbind Configuration

Local Winbind Configuration

Service Info

Winbind Domain Configuration Details

Local Winbind Configuration

Service Info

Winbind Domain Configuration Details