Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:


Table of Contents

Device Support Considerations

Ticket #

Description (9.1.7.0166)

548902 Management of wired ports on Aerohive AP-150W controlled by AerohiveNG is currently unsupported.
606729 The feature "Palo Alto VPN Integration" is currently not supported. It has been determined not to be ready for customer production use for managing remote user VPN connections through Palo Alto firewall.
679230 Aruba 9012-US currently not supported. If required, contact sales or support to submit a New Feature Request (NFR).
711696 Cisco SG200 support is limited to visibility only. The switch does not provide the management capabilities required for control/enforcement.
  At this time, integration with Juniper MAG6610 VPN Gateway is not supported. This includes Pulse Connect Secure ASA.
  At this time, integration with Cisco 1852i Controller is not supported due to the device's limited CLI and SNMP capability. For details, see related KB article 189545.
  At this time, integration with Ubiquiti AirOS AP is not supported. Ubiquiti AirOS AP does not have the necessary capabilities to allow for full integration with FortiNAC. The limitations are as follows: - No support for external MAC Authentication using RADIUS. - Limited CLI and SNMP capability. No ability to dynamically modify access parameters (ie. VLANs) for active sessions.
  At this time, Fortinet does not support wired port management for the Cisco 702W. The access point does not provide the management capabilities required.
  At this time, Fortinet is not able to support the Linksys LAPN600 Wireless-N600 Dual Band Access Point.
  Ports on Avaya Networks 4850GTS-PWR+ switches sometimes show "Not Connected" even though the port is active. This is due to multiple ports on the switch using the same MAC Address. This prevents NAC from correctly discerning which are "Connected" versus "Not Connected". There is no workaround.
  Device models for Avaya 4800 switches (and potentially other related models) only support SSH. Device models for Avaya Ethernet Routing Switches only support Telnet. Contact Support if the alternate protocol is required.

Device Support Considerations

Ticket #

Description (9.1.7.0166)

548902 Management of wired ports on Aerohive AP-150W controlled by AerohiveNG is currently unsupported.
606729 The feature "Palo Alto VPN Integration" is currently not supported. It has been determined not to be ready for customer production use for managing remote user VPN connections through Palo Alto firewall.
679230 Aruba 9012-US currently not supported. If required, contact sales or support to submit a New Feature Request (NFR).
711696 Cisco SG200 support is limited to visibility only. The switch does not provide the management capabilities required for control/enforcement.
  At this time, integration with Juniper MAG6610 VPN Gateway is not supported. This includes Pulse Connect Secure ASA.
  At this time, integration with Cisco 1852i Controller is not supported due to the device's limited CLI and SNMP capability. For details, see related KB article 189545.
  At this time, integration with Ubiquiti AirOS AP is not supported. Ubiquiti AirOS AP does not have the necessary capabilities to allow for full integration with FortiNAC. The limitations are as follows: - No support for external MAC Authentication using RADIUS. - Limited CLI and SNMP capability. No ability to dynamically modify access parameters (ie. VLANs) for active sessions.
  At this time, Fortinet does not support wired port management for the Cisco 702W. The access point does not provide the management capabilities required.
  At this time, Fortinet is not able to support the Linksys LAPN600 Wireless-N600 Dual Band Access Point.
  Ports on Avaya Networks 4850GTS-PWR+ switches sometimes show "Not Connected" even though the port is active. This is due to multiple ports on the switch using the same MAC Address. This prevents NAC from correctly discerning which are "Connected" versus "Not Connected". There is no workaround.
  Device models for Avaya 4800 switches (and potentially other related models) only support SSH. Device models for Avaya Ethernet Routing Switches only support Telnet. Contact Support if the alternate protocol is required.