Fortinet black logo

Administration Guide

Scans

Copy Link
Copy Doc ID 1ce38eeb-8119-11eb-9995-00505692583a:981182
Download PDF

Scans

Th Scans panel displays information about recent scans.

This panel may display different data than Scan Results, because information in the panel is retrieved from a different database. The Scans panel is also not affected by the scheduled archive and purge of scans. For more information, see Scan results view .

Use the Chart drop-down list to switch between Scans Per Day, Scans Per Hour, and Total Scans.

Use the Show options to select which scans to display from the following options:

  • Passed: Scans that ran and the host passed.
  • Failed: Scans that ran and the host failed. This includes scans that are set to Failure Pending.
  • Script Failed: Scan that tried to run but failed before determining the state of the host.
  • Warning: Scan determined that the host failed the scan policy and an administrator received a warning.

Use Chart Type to select whether to display a Line or Stacked Bar chart.

To filter data, do the following:

  1. Click Set Filter.
  2. If required, enable Type and select one of the following options:

    • SMA: Scans performed by the Dissolvable Agent
    • System: Scans performed by the system, based on the following scripts: ForceCSARescan, ForcePersistentAgent, PassAllClients, and FallAllClients.
    • SMA Agent: Sans performed by the Persistent Agent
    • Agent Monitor: Custom scans
  3. If required, enable Platform and select an operating system.
  4. If requred, enable Scan and select a scan by name.
  5. Click OK.

Filter options are saved for each administrator.

Scans

Th Scans panel displays information about recent scans.

This panel may display different data than Scan Results, because information in the panel is retrieved from a different database. The Scans panel is also not affected by the scheduled archive and purge of scans. For more information, see Scan results view .

Use the Chart drop-down list to switch between Scans Per Day, Scans Per Hour, and Total Scans.

Use the Show options to select which scans to display from the following options:

  • Passed: Scans that ran and the host passed.
  • Failed: Scans that ran and the host failed. This includes scans that are set to Failure Pending.
  • Script Failed: Scan that tried to run but failed before determining the state of the host.
  • Warning: Scan determined that the host failed the scan policy and an administrator received a warning.

Use Chart Type to select whether to display a Line or Stacked Bar chart.

To filter data, do the following:

  1. Click Set Filter.
  2. If required, enable Type and select one of the following options:

    • SMA: Scans performed by the Dissolvable Agent
    • System: Scans performed by the system, based on the following scripts: ForceCSARescan, ForcePersistentAgent, PassAllClients, and FallAllClients.
    • SMA Agent: Sans performed by the Persistent Agent
    • Agent Monitor: Custom scans
  3. If required, enable Platform and select an operating system.
  4. If requred, enable Scan and select a scan by name.
  5. Click OK.

Filter options are saved for each administrator.