Fortinet Document Library

Version:

Version:

Version:


Table of Contents

Administration Guide

Download PDF
Copy Link

Summary

This dashboard panel displays information about your servers.

If you are running in a High Availability Environment, a Resume Control button is displayed to allow you to restart the primary server and resynchronize the data. This button is only enabled if the Secondary Server is in control.

Field

Definition

Host Name

Name of the appliance on which FortiNAC is running.

Status

Indicates the current status of each appliance displayed. Statuses include:

  • Running — Appliance and software are running.
  • Not Reachable — Dashboard cannot communicate with the server.
  • Management Down — Appliance is running but the software is down.
  • Running - Idle — Appliance and software are up and running but there is currently no activity.
  • Running - In Control — Appliance and software are up and running. This appliance is in control vs. an appliance that may be the secondary appliance for high availability.
  • Running - Not In Control — Applies in a High Availability environment, where a secondary server is ready to take over in the event of a failure on the primary server. Indicates that the appliance and software are running, but are not in control.

Product

Software that is installed and running on the appliance or virtual machine.

Version

Version number of the software listed under Product.

Appliance

Model number is displayed.

Firmware

Version number of the internal release specific software installed on the displayed appliance or virtual machine.

RADIUS Server

Displays only if the integrated FortiNAC RADIUS server feature is enabled. If enabled, associated services and corresponding status are displayed. Services include RADIUS, MySQL, Samba and WinBind.

Restart Services

Restarts all of the RADIUS server services.

Restart With Debug

Restarts all of the RADIUS server services and enabled debug output in the RADIUS Server logs.

Summary

This dashboard panel displays information about your servers.

If you are running in a High Availability Environment, a Resume Control button is displayed to allow you to restart the primary server and resynchronize the data. This button is only enabled if the Secondary Server is in control.

Field

Definition

Host Name

Name of the appliance on which FortiNAC is running.

Status

Indicates the current status of each appliance displayed. Statuses include:

  • Running — Appliance and software are running.
  • Not Reachable — Dashboard cannot communicate with the server.
  • Management Down — Appliance is running but the software is down.
  • Running - Idle — Appliance and software are up and running but there is currently no activity.
  • Running - In Control — Appliance and software are up and running. This appliance is in control vs. an appliance that may be the secondary appliance for high availability.
  • Running - Not In Control — Applies in a High Availability environment, where a secondary server is ready to take over in the event of a failure on the primary server. Indicates that the appliance and software are running, but are not in control.

Product

Software that is installed and running on the appliance or virtual machine.

Version

Version number of the software listed under Product.

Appliance

Model number is displayed.

Firmware

Version number of the internal release specific software installed on the displayed appliance or virtual machine.

RADIUS Server

Displays only if the integrated FortiNAC RADIUS server feature is enabled. If enabled, associated services and corresponding status are displayed. Services include RADIUS, MySQL, Samba and WinBind.

Restart Services

Restarts all of the RADIUS server services.

Restart With Debug

Restarts all of the RADIUS server services and enabled debug output in the RADIUS Server logs.