VT100 Control / Command sequences
NCM Mass Config Push allows you to send various command sequences (VT100 control characters) to the device using the push.
Please use these variables in Config Push when sending control sequences:
Control sequence |
NCM variable |
Control sequence |
NCM variable |
|
---|---|---|---|---|
CTRL + A |
$[0x01] |
CTRL + N |
$[0x0E] |
|
CTRL + B |
$[0x02] |
CTRL + O |
$[0x0F] |
|
CTRL + C |
$[0x03] |
CTRL + P |
$[0x10] |
|
CTRL + D |
$[0x04] |
CTRL + Q |
$[0x11] |
|
CTRL + E |
$[0x05] |
CTRL + R |
$[0x12] |
|
CTRL + F |
$[0x06] |
CTRL + S |
$[0x13] |
|
CTRL + G |
$[0x07] |
CTRL + T |
$[0x14] |
|
CTRL + H |
$[0x08] |
CTRL + U |
$[0x15] |
|
CTRL + I |
$[0x09] |
CTRL + V |
$[0x16] |
|
CTRL + J |
$[0x0A] |
CTRL + W |
$[0x17] |
|
CTRL + K |
$[0x0B] |
CTRL + X |
$[0x18] |
|
CTRL + L |
$[0x0C] |
CTRL + Y |
$[0x19] |
|
CTRL + M |
$[0x0D] |
CTRL + Z |
$[0x1A] |