Start or end Maintenance from the FortiMonitor Linux Agent
You can start or end maintenance on the server where the Linux Agent is installed using the server's command-line interface. Starting maintenance will end any active incidents on the server and prevent new ones from being created while the maintenance period is active.
To start or end the maintenance, run the following command with the appropriate options:
python /usr/bin/fm-agent/maintenance.py
|
Option |
Description |
|---|---|
|
Lists all of the supported options and their description. |
|
Start maintenance. This option must always be used with -d or --duration. |
|
The duration of the maintenance in minutes. |
|
End any active maintenance on the server. |
|
An optional comma-separated list of tags to pass to the maintenance. |
For example, to start a maintenance period of 120 minutes, run the following command:
python3 /usr/bin/fm-agent/maintenance.py --start --duration=120
An error will occur if you start a maintenance period without including a duration.
To end any active maintenance on the server, run the following command:
python /usr/bin/fm-agent/maintenance.py --end
Log messages can be found in /var/log/fm-agent/maintenance.log.