Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:


Table of Contents

Administration Guide

Creating Flex-VM connectors

You can configure a Flex-VM connector to allow FortiManager to assign licenses to managed FortiGate devices through the device manager. See Installing VM licenses.

To create a Flex-VM connector:
  1. Go to Policy & Objects > Object Configurations > Fabric Connectors > Endpoint/Identity.
  2. Click Create New, and select Flex-VM Connector.
    The Create New Flex-VM Connector wizard opens.
  3. Enter the following information:
    NameEnter a name for the Flex-VM connector.
    StatusToggle the slider on or off to enable or disable the connector.
    API UserEnter the username for your Flex-VM API user.
    API PasswordEnter the password for your Flex-VM API user.
    Program SNEnter your Flex-VM program SN.
  4. Click OK to save the connector.
    Once the connector has been created, it can be used to install VM licenses to managed FortiGate devices in the Device Manager.

Creating Flex-VM connectors

You can configure a Flex-VM connector to allow FortiManager to assign licenses to managed FortiGate devices through the device manager. See Installing VM licenses.

To create a Flex-VM connector:
  1. Go to Policy & Objects > Object Configurations > Fabric Connectors > Endpoint/Identity.
  2. Click Create New, and select Flex-VM Connector.
    The Create New Flex-VM Connector wizard opens.
  3. Enter the following information:
    NameEnter a name for the Flex-VM connector.
    StatusToggle the slider on or off to enable or disable the connector.
    API UserEnter the username for your Flex-VM API user.
    API PasswordEnter the password for your Flex-VM API user.
    Program SNEnter your Flex-VM program SN.
  4. Click OK to save the connector.
    Once the connector has been created, it can be used to install VM licenses to managed FortiGate devices in the Device Manager.