Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:


Table of Contents

Administration Guide

Viewing the traffic shaping widget

Viewing the traffic shaping widget

You can view the Traffic Shaping widget in the Device Manager.

Note

To view traffic shaping information, you must enable traffic shaping history. Traffic shaping history can be enabled in the CLI using the following commands:

config system admin setting

traffic-shaping-history enable

To view the Traffic Shaping monitor:
  1. Go to Device Manager > Device & Groups, and select a device.
  2. In the device database's toolbar, select or create a Dashboard.
  3. On the dashboard page, click Add Widget in the toolbar, and select the Traffic Shaping (Interface-based).
    The Traffic Shaping (Interface-based) widget is added to the dashboard.
  4. From the dropdown, select an interface.
    • The Bandwidth chart shows the bandwidth for each class.
    • The Dropped Bytes chart shows the statistics for bytes dropped after shaping is applied.

Viewing the traffic shaping widget

Viewing the traffic shaping widget

You can view the Traffic Shaping widget in the Device Manager.

Note

To view traffic shaping information, you must enable traffic shaping history. Traffic shaping history can be enabled in the CLI using the following commands:

config system admin setting

traffic-shaping-history enable

To view the Traffic Shaping monitor:
  1. Go to Device Manager > Device & Groups, and select a device.
  2. In the device database's toolbar, select or create a Dashboard.
  3. On the dashboard page, click Add Widget in the toolbar, and select the Traffic Shaping (Interface-based).
    The Traffic Shaping (Interface-based) widget is added to the dashboard.
  4. From the dropdown, select an interface.
    • The Bandwidth chart shows the bandwidth for each class.
    • The Dropped Bytes chart shows the statistics for bytes dropped after shaping is applied.