dm
Use this command to configure Deployment Manager (DM) settings.
Syntax
config system dm
set concurrent-install-image-limit <integer>
set concurrent-install-limit <integer>
set concurrent-install-script-limit <integer>
set conf-merge-after-script {enable | disable}
set discover-timeout <integer>
set dpm-logsize <integer>
set fgfm-auto-retrieve-timeout <integer>
set fgfm-install-refresh-count <integer>
set fgfm-sock-timeout <integer>
set fgfm_keepalive_itvl <integer>
set force-remote-diff {enable | disable}
set fortiap-refresh-cnt <integer>
set fortiap-refresh-itvl <integer>
set fortiext-refresh-cnt <integer>
set install-image-timeout <integer>
set install-tunnel-retry-itvl <integer>
set log-autoupdate {enable | disable}
set max-revs <integer>
set nr-retry <integer>
set retry {enable | disable}
set retry-intvl <integer>
set rollback-allow-reboot {enable | disable}
set script-logsize <integer>
set skip-scep-check {enable | disable}
set skip-tunnel-fcp-req {enable | disable}
set verify-install {enable | disable | optimal}
end
|
Variable |
Description |
|---|---|
|
concurrent-install-image-limit <integer> |
The maximum number of concurrent installs (1 - 1000, default = 500). |
|
concurrent-install-limit <integer> |
The maximum number of concurrent installs (5 - 2000, default = 480). |
|
concurrent-install-script-limit <integer> |
The maximum number of concurrent install scripts (5 - 2000, default = 480). |
|
conf-merge-after-script {enable | disable} |
Merge config after running the script on the remote device, instead of a full retrieve (default = disable). |
|
discover-timeout <integer> |
Check connection timeout when discovering a device (3 - 15, default = 6). |
|
dpm-logsize <integer> |
The maximum DPM log size per device, in kilobytes (1 - 10000, default = 10000). |
|
fgfm-auto-retrieve-timeout <integer> |
The maximum waiting time for auto retrieve in seconds (60 - 10800, default = 1800). |
|
fgfm-install-refresh-count <integer> |
The maximum FGFM install refresh attempts (default = 10). |
|
fgfm-sock-timeout <integer> |
The maximum FGFM communication socket idle time, in seconds (90 - 1800, default = 360). |
|
fgfm_keepalive_itvl <integer> |
The FortiManager/FortiGate communication protocol keep alive interval, in seconds (30 - 600, default = 120). |
|
force-remote-diff {enable | disable} |
Enable/disable always using remote diff when installing (default = disable). |
|
fortiap-refresh-cnt <integer> |
Maximum auto refresh FortiAP number each time (1 - 10000, default = 500). |
|
fortiap-refresh-itvl <integer> |
Auto refresh FortiAP status interval, in minutes (1 - 1440, 0 to disable, default = 10). |
|
fortiext-refresh-cnt <integer> |
Maximum device number for FortiExtender auto refresh (1 - 10000, default = 50). |
|
install-image-timeout <integer> |
Maximum waiting time for image transfer and device upgrade, in seconds (600 - 7200, default = 3600). |
|
install-tunnel-retry-itvl <integer> |
Time to re-establish tunnel during install, in seconds (10 - 60, default = 60). |
|
log-autoupdate {enable | disable} |
Enable/disable autoupdate debug logging (default = disable). |
|
max-revs <integer> |
The maximum number of revisions saved (1 - 250, default = 100). |
|
nr-retry <integer> |
The number of times the FortiManager unit will retry (default = 1). |
|
retry {enable | disable} |
Enable/disable configuration installation retries (default = enable). |
|
retry-intvl <integer> |
The interval between attempting another configuration installation following a failed attempt (default = 15). |
|
rollback-allow-reboot {enable | disable} |
Enable/disable allowing a FortiGate unit to reboot when installing a script or configuration (default = disable). |
|
script-logsize <integer> |
Enter the maximum script log size per device, in kilobytes (1 - 10000, default = 100). |
|
skip-scep-check {enable | disable} |
Enable/disable installing scep related objects even if the scep URL is configured (default = disable). |
|
skip-tunnel-fcp-req {enable | disable} |
Enable/disable skipping the FCP request sent from an FGFM tunnel (default = enable). |
|
verify-install {enable | disable | optimal} |
Enable/disable verify install against remote configuration:
|
Example
This example shows how to set up configuration installations. It shows how to set 5 attempts to install a configuration on a FortiGate device, waiting 30 seconds between attempts.
config system dm
set retry enable
set nr-retry 5
set retry-intvl 30
end