ntp

Use this command to configure automatic time setting using a network time protocol (NTP) server.

Syntax

config system ntp

set status {enable | disable}

set sync_interval <string>

config ntpserver

edit <id>

set ntpv3 {enable | disable}

set authentication {enable | disable}

set key <passwd>

set key-id <integer>

set server <string>

end

end

Variable	Description
status {enable | disable}	Enable/disable NTP time setting (default = disable).
sync_interval <string>	Enter how often the FortiManager unit synchronizes its time with the NTP server, in minutes (1 - 1440, default = 60).
Variables for config ntpserver subcommand:
<id>	Time server ID.
ntpv3 {enable | disable}	Enable/disable NTPv3 (default = disable).
authentication {enable | disable}	Enable/disable MD5 authentication (default = disable).
key <passwd>	The authentication key (character limit = 63).
key-id <integer>	The key ID for authentication (default = 0).
server <string>	Enter the IPv4 or IPv6 address or fully qualified domain name of the NTP server.