Fortinet Document Library

Version:


Table of Contents

7.0.1
Copy Link

SLA Configurations

This section explains how to configure Service Level Agreement (SLA) to define values to match network deployment and required thresholds.

Time To Connect

These configurations compute the time taken by devices to connect to the network. Based on the configured thresholds, statistics are displayed in the Monitor tab.

Configure the time (milliseconds) for the following stages of client connection to a network.

  • Association - The time taken to successfully associate.
  • Authentication - The time taken by associated clients to authenticate.
  • DHCP - The time taken by successfully associated and authenticated clients to receive a valid DHCP address.
  • DNS - The time taken by successfully associated, authenticated, and received a DHCP address clients to resolve their first DNS request.
    Note: The default value for these parameters is 300 milliseconds.

AP Health and Switch Health

These configurations determine the health of the AP and switch based on the following set thresholds and display relevant statistics in the Monitor tab.

  • CPU usage
  • Memory usage
  • Temperature

The default value for the health parameters described here is 60.

SLA Configurations

This section explains how to configure Service Level Agreement (SLA) to define values to match network deployment and required thresholds.

Time To Connect

These configurations compute the time taken by devices to connect to the network. Based on the configured thresholds, statistics are displayed in the Monitor tab.

Configure the time (milliseconds) for the following stages of client connection to a network.

  • Association - The time taken to successfully associate.
  • Authentication - The time taken by associated clients to authenticate.
  • DHCP - The time taken by successfully associated and authenticated clients to receive a valid DHCP address.
  • DNS - The time taken by successfully associated, authenticated, and received a DHCP address clients to resolve their first DNS request.
    Note: The default value for these parameters is 300 milliseconds.

AP Health and Switch Health

These configurations determine the health of the AP and switch based on the following set thresholds and display relevant statistics in the Monitor tab.

  • CPU usage
  • Memory usage
  • Temperature

The default value for the health parameters described here is 60.