Fortinet black logo

Administration Guide

Assign SD-WAN templates to devices and device groups

Assign SD-WAN templates to devices and device groups

You can assign SD-WAN templates to FortiGate devices. The network parameters specified in the SD-WAN template are used to measure the performance of the WAN link on the FortiGate device.

To assign an SD-WAN template to a FortiGate device or device group:
  1. If using ADOMs, ensure that you are in the correct ADOM.
  2. Go to Device Manager > Provisioning Templates > SD-WAN Templates.

    The SD-WAN templates are displayed in the content pane.

  3. Select a template, and click Assign to Device/Group.

    The Assign to Device/Group dialog opens.

  4. In the Available Entries list, select a FortiGate, and click > to move the FortiGate to the Selected Entries list.
  5. Click OK.
To edit an assigned device:
  1. If using ADOMs, ensure that you are in the correct ADOM.
  2. Go to Device Manager > Provisioning Templates > SD-WAN Templates.

    The SD-WAN templates are displayed in the content pane.

  3. Select the template with the assigned device, and click Assign to Device/Groups in the toolbar, or right-click the device and select Assign to Device/Groups.

    The Assign to Device/Groups page opens.

  4. Edit the assigned devices or device groups, and click OK to apply your changes.

Assign SD-WAN templates to devices and device groups

You can assign SD-WAN templates to FortiGate devices. The network parameters specified in the SD-WAN template are used to measure the performance of the WAN link on the FortiGate device.

To assign an SD-WAN template to a FortiGate device or device group:
  1. If using ADOMs, ensure that you are in the correct ADOM.
  2. Go to Device Manager > Provisioning Templates > SD-WAN Templates.

    The SD-WAN templates are displayed in the content pane.

  3. Select a template, and click Assign to Device/Group.

    The Assign to Device/Group dialog opens.

  4. In the Available Entries list, select a FortiGate, and click > to move the FortiGate to the Selected Entries list.
  5. Click OK.
To edit an assigned device:
  1. If using ADOMs, ensure that you are in the correct ADOM.
  2. Go to Device Manager > Provisioning Templates > SD-WAN Templates.

    The SD-WAN templates are displayed in the content pane.

  3. Select the template with the assigned device, and click Assign to Device/Groups in the toolbar, or right-click the device and select Assign to Device/Groups.

    The Assign to Device/Groups page opens.

  4. Edit the assigned devices or device groups, and click OK to apply your changes.