Fortinet black logo

Wireless Manager (FortiWLM) 8.6.1 Administration Guide

Adding controllers to the device inventory

7.0.0
Copy Link
Copy Doc ID 028df4fd-a293-11eb-b70b-00505692583a:23711
Download PDF

Adding controllers to the device inventory

In the ADOM mode, you can add controllers managed by the particular ADOM of the FortiManager. In the non-ADOM mode, you can add any controller managed by FortiManager.

To add a controller to the device inventory:

  1. Click Add on the upper-left of the devices inventory. The Add Device dialog appears. You can Discover Device using Add Model Device option where the FortiGate controller is discovered manually using the serial number. The added controller is in the offline state. See the FortiManager Administration Guide for procedural steps to add devices to FortiManager.
    The Add Device(s) from FortiManager option lists the controllers managed by the particular ADOM in FortiManager. Select the required controller.
  2. Click Save. The controller is added to the device inventory table.

Adding controllers to the device inventory

In the ADOM mode, you can add controllers managed by the particular ADOM of the FortiManager. In the non-ADOM mode, you can add any controller managed by FortiManager.

To add a controller to the device inventory:

  1. Click Add on the upper-left of the devices inventory. The Add Device dialog appears. You can Discover Device using Add Model Device option where the FortiGate controller is discovered manually using the serial number. The added controller is in the offline state. See the FortiManager Administration Guide for procedural steps to add devices to FortiManager.
    The Add Device(s) from FortiManager option lists the controllers managed by the particular ADOM in FortiManager. Select the required controller.
  2. Click Save. The controller is added to the device inventory table.