Fortinet black logo

SD-WAN Orchestrator 6.4.1 r7 Administration Guide

Adding email servers

6.4.6
Copy Link
Copy Doc ID 6173f038-d5de-11eb-97f7-00505692583a:810734
Download PDF

Adding email servers

You can add an email server to SD-WAN Orchestrator MEA, and then select the server in profiles and devices.

To add email servers:
  1. Go to Configuration > Shared Resources > System > Email Server.
  2. In the toolbar, click Create New.
  3. Configure the email server settings and click OK.

    Option

    Description

    Name Enter a name for the email server.
    Address Type From the dropdown, select IPv4 or FQDN.
    Address Enter the email server's IP address or host name.
    Authentication Toggle On to enable authentication, then enter the Username and Password.

    Username

    Available when Authentication is enabled.

    Password

    Available when Authentication is enabled.

    Port Enter the port number.

    Reply To

    Enter the email address users can reply to.

    Security

    From the dropdown, select None, STARTTLS, or SMTPS .

    SSL Version

    From the dropdown, select the SSL version.

    Validate Server

    Toggle On to enable validation.

Adding email servers

You can add an email server to SD-WAN Orchestrator MEA, and then select the server in profiles and devices.

To add email servers:
  1. Go to Configuration > Shared Resources > System > Email Server.
  2. In the toolbar, click Create New.
  3. Configure the email server settings and click OK.

    Option

    Description

    Name Enter a name for the email server.
    Address Type From the dropdown, select IPv4 or FQDN.
    Address Enter the email server's IP address or host name.
    Authentication Toggle On to enable authentication, then enter the Username and Password.

    Username

    Available when Authentication is enabled.

    Password

    Available when Authentication is enabled.

    Port Enter the port number.

    Reply To

    Enter the email address users can reply to.

    Security

    From the dropdown, select None, STARTTLS, or SMTPS .

    SSL Version

    From the dropdown, select the SSL version.

    Validate Server

    Toggle On to enable validation.