Fortinet black logo

SD-WAN Orchestrator 6.4.1 r7 Administration Guide

Adding physical interfaces for VDOMs

6.4.6
Copy Link
Copy Doc ID 6173f038-d5de-11eb-97f7-00505692583a:779029
Download PDF

Adding physical interfaces for VDOMs

When creating a profile for VDOMs, you can add physical interfaces to the profile and configure them. The settings in the profile can be used for all VDOMs.

Instead of adding physical interfaces to the profile for all VDOMs, you can retrieve interfaces for the VDOM when you add it to SD-WAN Orchestrator MEA. See Adding VDOMs .

To add physical interfaces:
  1. Go to Configuration > Profile.

    The list of profiles is displayed.

  2. Create a new profile, or open a profile for updating.

    The Profile <name> dialog box is displayed.

  3. Click the Network tab.

    The Network pane is displayed. For a description of the options, see Network tab.

  4. Add physical interfaces to the profile:
    1. Click Add Physical Interface.

      The Add Interface dialog box is displayed.

    2. Complete the options, and click OK.

      Option

      Description

      Available Interface

      Select an interface.

      Role

      Specify a role for the interface. Choose from the following:

      • WAN
      • LAN
      • DMZ
    3. When you are finished adding physical interfaces, close the dialog box.

      The added interfaces display in the section for the role. For example, if you added a physical interface for a role of WAN, the interface displays in the WAN table.

  5. Click OK.

    The profile is saved.

Adding physical interfaces for VDOMs

When creating a profile for VDOMs, you can add physical interfaces to the profile and configure them. The settings in the profile can be used for all VDOMs.

Instead of adding physical interfaces to the profile for all VDOMs, you can retrieve interfaces for the VDOM when you add it to SD-WAN Orchestrator MEA. See Adding VDOMs .

To add physical interfaces:
  1. Go to Configuration > Profile.

    The list of profiles is displayed.

  2. Create a new profile, or open a profile for updating.

    The Profile <name> dialog box is displayed.

  3. Click the Network tab.

    The Network pane is displayed. For a description of the options, see Network tab.

  4. Add physical interfaces to the profile:
    1. Click Add Physical Interface.

      The Add Interface dialog box is displayed.

    2. Complete the options, and click OK.

      Option

      Description

      Available Interface

      Select an interface.

      Role

      Specify a role for the interface. Choose from the following:

      • WAN
      • LAN
      • DMZ
    3. When you are finished adding physical interfaces, close the dialog box.

      The added interfaces display in the section for the role. For example, if you added a physical interface for a role of WAN, the interface displays in the WAN table.

  5. Click OK.

    The profile is saved.