Fortinet black logo

Version:


Table of Contents

6.4.4
Download PDF
Copy Link

Resolved Issues

The following issues have been fixed in 6.4.1.r5. For inquires about a particular bug, please contact Customer Service & Support.

Bug ID

Description

678140

RETRIEVE_CONFIG doesn't properly import some of existing configurations.

681956

User can choose the secondary hub or link from the Dual Hub Load Mode option, only when the primary hub is down.

682621

Importing SDWAN O R3 configuration into the SDWAN O R4 version changes the Hub role profile to the Edge role profile.

681612 ADVPN shortcuts never expire.
633828 The set preserve-session-route is always set to Enable on IPsec tunnels.
677972 The SD-WAN Orchestrator API connection is denied if the FortiGate has a non-standard HTTPS port.
677129 Log shows the controller version always goes from 256 to the latest build number while upgrading.
681618 Unfiltered prefix advertisement between Hubs causes internal prefixes to be resolved via Internet underlays.
670929 Orchestrator configures set preserve-session-route enable on interfaces by default.
670835 Default static route updates in Health Checks brings down all tunnels.
677654

Revised SD-WAN release numbers.

685583

Sync all will cause a conflict with Blackhole when executing the backup and restoring the configuration.

685584

Switching ADOM may cause the Maintenance menu to disappear.

678142

Default route via all overlays (due to static set sdwan enable) breaks SD-WAN switchover in some failure scenarios.

685747 If an IP pool conflicts with a WAN IP address, a message should be reported, and do not allow sync all to be clicked.
668211

If FortiManager tasks fail, the retrieve action will change the HA mode to Standalone mode.

Resolved Issues

The following issues have been fixed in 6.4.1.r5. For inquires about a particular bug, please contact Customer Service & Support.

Bug ID

Description

678140

RETRIEVE_CONFIG doesn't properly import some of existing configurations.

681956

User can choose the secondary hub or link from the Dual Hub Load Mode option, only when the primary hub is down.

682621

Importing SDWAN O R3 configuration into the SDWAN O R4 version changes the Hub role profile to the Edge role profile.

681612 ADVPN shortcuts never expire.
633828 The set preserve-session-route is always set to Enable on IPsec tunnels.
677972 The SD-WAN Orchestrator API connection is denied if the FortiGate has a non-standard HTTPS port.
677129 Log shows the controller version always goes from 256 to the latest build number while upgrading.
681618 Unfiltered prefix advertisement between Hubs causes internal prefixes to be resolved via Internet underlays.
670929 Orchestrator configures set preserve-session-route enable on interfaces by default.
670835 Default static route updates in Health Checks brings down all tunnels.
677654

Revised SD-WAN release numbers.

685583

Sync all will cause a conflict with Blackhole when executing the backup and restoring the configuration.

685584

Switching ADOM may cause the Maintenance menu to disappear.

678142

Default route via all overlays (due to static set sdwan enable) breaks SD-WAN switchover in some failure scenarios.

685747 If an IP pool conflicts with a WAN IP address, a message should be reported, and do not allow sync all to be clicked.
668211

If FortiManager tasks fail, the retrieve action will change the HA mode to Standalone mode.