Fortinet black logo

Administration Guide

Assign SD-WAN templates to devices

Assign SD-WAN templates to devices

When SD-WAN central management is enabled, you can assign SD-WAN templates to FortiGate devices. The network parameters specified in the SD-WAN template are used to measure the performance of the WAN link on the FortiGate device.

To assign an SD-WAN template to a FortiGate device:
  1. Ensure that you are in the correct ADOM and that central SD-WAN management is enabled.
  2. Go to Device Manager > SD-WAN > SD-WAN Templates.

    The SD-WAN templates are displayed in the content pane.

  3. Select a template, and click Assign to Device.

    The Assign to Device page opens.

  4. In the Available Entries list, select a FortiGate, and click > to move the FortiGate to the Selected Entries list.
  5. Click OK.
To edit an assigned device:
  1. If using ADOMs, ensure that you are in the correct ADOM.
  2. Go to Device Manager > SD-WAN > SD-WAN Templates.
  3. Select the template with the assigned device, and click Assign to Device in the toolbar, or right-click the device and select Assign to Device.

    The Assign to Device page opens.

  4. Edit the assigned devices, and click OK to apply your changes.

Assign SD-WAN templates to devices

When SD-WAN central management is enabled, you can assign SD-WAN templates to FortiGate devices. The network parameters specified in the SD-WAN template are used to measure the performance of the WAN link on the FortiGate device.

To assign an SD-WAN template to a FortiGate device:
  1. Ensure that you are in the correct ADOM and that central SD-WAN management is enabled.
  2. Go to Device Manager > SD-WAN > SD-WAN Templates.

    The SD-WAN templates are displayed in the content pane.

  3. Select a template, and click Assign to Device.

    The Assign to Device page opens.

  4. In the Available Entries list, select a FortiGate, and click > to move the FortiGate to the Selected Entries list.
  5. Click OK.
To edit an assigned device:
  1. If using ADOMs, ensure that you are in the correct ADOM.
  2. Go to Device Manager > SD-WAN > SD-WAN Templates.
  3. Select the template with the assigned device, and click Assign to Device in the toolbar, or right-click the device and select Assign to Device.

    The Assign to Device page opens.

  4. Edit the assigned devices, and click OK to apply your changes.