Network tab
The Network tab contains the following sections:
WAN
Expand WAN to view the following options:
Option |
Description |
---|---|
Create New |
Click Create New to define a new WAN interface. You can define the port type as VLAN or AGGREGATE. When the port type is AGGREGATE, you must save the WAN configuration, and then open it for editing to add interface members. See also Creating new WAN settings. |
Interface |
Displays the interface name. |
Interface Members |
Displays the interface members for an aggregate interface. |
Vlan |
Displays whether VLAN is used. |
ISP Link |
Displays the name of the ISP link. |
WAN Type |
Displays the type of WAN used. |
Private Wire |
Displays whether a private wire is used. |
Mode |
Displays the mode used by the interface. |
Enable |
Indicates whether the interface is enabled. |
Access |
Displays the types of access to allowed for the interface. |
Update |
Click the Update icon to edit the settings. |
LAN
Expand LAN to view the following options:
Option |
Description |
---|---|
Create New |
Click Create New to define a new LAN interface. You can define the port type as VLAN, WiFi_SSID, or AGGREGATE. When the port type is AGGREGATE, you must save the LAN configuration, and then open it for editing to add interface members. See also Creating new LAN settings. |
Switch/AP |
Click Switch/AP to define settings for FortiSwitch and FortiAP devices. |
Interface |
Displays the interface name. |
Vlan |
Displays whether VLAN is used. |
Interface Members | Displays the interface members for an aggregate interface. |
Subnet Type | Displays the type of subnet. |
IP Address | Displays the IP address. |
DHCP Server/Relay | Displays the DHCP mode |
DHCP Pool Size |
Displays the DHCP pool size. |
Access |
Displays the types of access to allowed for the interface. |
Update |
Click the Update icon to edit the settings. |
DMZ
Expand DMZ to view the following options:
Option |
Description |
---|---|
Create New |
Click Create New to define a new DMZ interface. You can define the port type as VLAN or AGGREGATE. When the port type is AGGREGATE, you must save the DMZ configuration, and then open it for editing to add interface members. |
Interface |
Displays the interface name. |
Vlan |
Displays whether VLAN is used. |
Interface Members |
Displays the interface members for an aggregate interface. |
Enable |
Indicates whether the interface is enabled. |
Access |
Displays the types of access to allowed for the interface. |
Update |
Click the Update icon to edit the settings. |
BGP
Expand BGP to view the following options:
Option |
Description |
---|---|
Create New |
Click Create New to define a new DMZ interface. |
Type |
Displays the type of BGP network. |
Subnet | Displays the physical port. |
Update |
Click the Update icon to edit the settings. |
DNS Server
Expand DNS Server to view the following options:
Option |
Description |
---|---|
Server Name |
Select a DNS server that you added to SD-WAN Orchestrator MEA. |
SNMP
Expand SNMP to view the following options:
Option |
Description |
---|---|
SNMP Agent |
Toggle on to enable an SNMP agent. Toggle off to disable this feature. |
HA Interfaces
Expand HA Interfaces to view the following options:
Option |
Description |
---|---|
Monitor Interfaces |
Select a port for monitoring interfaces. You can use the same port as the FortiManager heartbeat interface. |
Heartbeat Interfaces |
Select a port to use for the heartbeat. You can use the same port as the FortiManager monitor interface. |
When a profile without HA interface definitions is assigned to a device in an HA cluster, default ports are used. For Monitor Interfaces, WAN1 is used, and for Heartbeat Interfaces, the last LAN port is used.