Version:


Table of Contents

SD-WAN Orchestrator 6.4.1 r4 Administration Guide

6.4.3
Download PDF
Copy Link

Viewing device link reports

The Devices > Link tab contains information about the underlay, static overlay, and shortcut overlay links.

To view device link reports:
  1. Go to Monitor > Devices > Link.

    The Static Overlay tab displays for the selected device. You can also click the Underlay or Shortcut Overlay tabs.

    You can switch between devices by using the dropdown menu in the toolbar at the top of the page.

    Report  
    Static Overlay

    The Static Overlay pane is the default view of the Link page and includes the views:

    • Quality: Contains reports of quality evaluation, jitter, latency, and packet loss in the device overlay links.
    • Traffic: Contains reports about the total inbound/outbound throughput and session.
    Underlay

    The Underlay pane includes the following views: 

    • Traffic: Contains reports about the total inbound and outbound throughput, and session ramp-up of the SD-WAN underlay links. The table features information about the device's status, inbound/outbound bytes, and session of the underlay link.Quality: Contains reports about performance status, packet loss, jitter, and latency for the device overlay links.
    Shortcut Overlay

    Available when ADVPN is enabled on devices, and shortcut links are established.

    The charts monitor the total inbound and outbound throughput of the shortcut overly links.

    The table features information about peer devices, inbound/outbound bytes, and bandwidth.

  2. Select the time frame to filter data by time.

    On the Static Overlay tab, you can also display data by traffic or quality.

  3. Click the Hubs box to filter by All Hubs, All Edges, or Peer Hubs.
  4. Click the Export button to export the report to PDF.

Viewing device link reports

The Devices > Link tab contains information about the underlay, static overlay, and shortcut overlay links.

To view device link reports:
  1. Go to Monitor > Devices > Link.

    The Static Overlay tab displays for the selected device. You can also click the Underlay or Shortcut Overlay tabs.

    You can switch between devices by using the dropdown menu in the toolbar at the top of the page.

    Report  
    Static Overlay

    The Static Overlay pane is the default view of the Link page and includes the views:

    • Quality: Contains reports of quality evaluation, jitter, latency, and packet loss in the device overlay links.
    • Traffic: Contains reports about the total inbound/outbound throughput and session.
    Underlay

    The Underlay pane includes the following views: 

    • Traffic: Contains reports about the total inbound and outbound throughput, and session ramp-up of the SD-WAN underlay links. The table features information about the device's status, inbound/outbound bytes, and session of the underlay link.Quality: Contains reports about performance status, packet loss, jitter, and latency for the device overlay links.
    Shortcut Overlay

    Available when ADVPN is enabled on devices, and shortcut links are established.

    The charts monitor the total inbound and outbound throughput of the shortcut overly links.

    The table features information about peer devices, inbound/outbound bytes, and bandwidth.

  2. Select the time frame to filter data by time.

    On the Static Overlay tab, you can also display data by traffic or quality.

  3. Click the Hubs box to filter by All Hubs, All Edges, or Peer Hubs.
  4. Click the Export button to export the report to PDF.