Resolved Issues
The following issues have been fixed in 6.4.1 r3. For inquires about a particular bug, please contact Customer Service & Support.
|
Bug ID |
Description |
|---|---|
| 659646 | JDK crashes immediately on CPUs without AVX |
| 649443 | When add or edit business rule, Auto-Assign address objects and groups are deleted in FortiManager |
| 661008 | [Project_6.4.0]While change dhcp mode from server to relay or from relay to server, the dhcp share resource should be cleared |
| 659266 | [Project_6.4.0]While the browser not as full screen, In sw/ap config page, the tables inside will be crowded together |
| 659255 | [Project_6.4.0]There is no logs for add, delete, config FAP and FSW |
| 658184 | [Project_6.4.0][Suggestion]The polling time is to long for polling fgt contract stats. |
| 644656 | [Project_6.4.0]The reminder message is not complete while delete switch vlan which assign to switch port |
| 625980 | [Project_6.4.0][Project_6.4.0]Add FGT 300E and 600E by "Add Model Device" will get conflict and deploy process will get stuck |
| 599725 | [Project_6.4.0] When dragging a device to move its position, the icon often moves back to its original position |
| 648008 | Remove Namibia from AP profile country list |
| 646712 | FMG 6.4.2 will hide the old SSID manual selection |
| 660746 | Hide unused attributes for radio modes disable and monitor |
| 657600 | Controller backendprint many null pointer exception. |
| 645493 | [Project_6.4.0]After add FG via "add model device" the GUI will be report Conflict with "Device: xx is not exists!" |
| 658055 | [Project_6.4.1]No log is generated when configuring switch/ap with fortilink member |
| 604175 | [Project_6.4.0] Sometimes set location for device in dashboard will be display extra word |
| 658817 | [Project_6.4.1] The controller allow add the same VLAN ID that should be fix |
| 624993 | [Project_6.4.0] Sometimes deploy done the FG display offline |