Creating new LAN settings

When creating a profile, you can also create new LAN settings.

To create new LAN settings:

1. Go to Configuration > Profile.

   The list of profiles is displayed.

2. Create a new profile, or open a profile for updating.

   The Profile <name> dialog box is displayed.

3. Click the Network tab.

   The Network pane is displayed. For a description of the options, see Network tab.

4. Expand the LAN section, and click +Create New.

   The LAN dialog box is displayed.

5. In the Name box, type a name for the LAN settings.
6. In the Port Type box, select the port, and complete the options.

   Choose between VLAN, WiFi_SSID, and Aggregate.

7. Complete the remaining options, and click OK.

   Option	Description
   Allow Overlap Between Devices	Toggle on to allow overlap between devices. Toggle off to disable this feature.
   IP Address	Available when Allow Overlap Between Devices is enabled.
   IP Auto Assign	Available when Allow Overlap Between Devices is disabled. Toggle on to automatically assign IP addresses. Toggle off to disable this feature.
   IP Pool	Available when IP Auto Assign is enabled. Specify a pool of IP addresses to be used for SD-WAN Orchestrator MEA to automatically assign.
   Subnet Mask Length	Available when IP Auto Assign is enabled. Specify the length of the subnet mask.
   DHCP Mode	Choose from: None Server Relay
   Access Types	Select the types of access to allow on the interface.

   The LAN settings are saved.

8. If you set Port Type to AGGREGATE, open the LAN settings for editing, select interface members, and click OK.

   Interface members are added to the LAN settings.