Version:


Table of Contents

6.4.2
Download PDF
Copy Link

Upgrading SD-WAN Orchestrator MEA after FortiManager

If you have already upgraded FortiManager to 6.4.2, you can upgrade SD-WAN Orchestrator MEA by using the CLI. You cannot use the SD-WAN Orchestrator MEA GUI for this upgrade scenario.

In this scenario, you are starting the upgrade with the following items:

  • FortiManager 6.4.2
  • SD-WAN Orchestrator MEA 6.4.1
To upgrade SD-WAN Orchestrator MEA by using the CLI:
  1. Ensure that FortiManager has been upgraded to 6.4.2.
  2. In the FortiManager banner, click the CLI console button located in the top-right corner.

    The CLI Console opens.

  3. Run the following command:

    diagnose docker upgrade sdwancontroller

    SD-WAN Orchestrator MEA is upgraded to 6.4.1 r2.

Upgrading SD-WAN Orchestrator MEA after FortiManager

If you have already upgraded FortiManager to 6.4.2, you can upgrade SD-WAN Orchestrator MEA by using the CLI. You cannot use the SD-WAN Orchestrator MEA GUI for this upgrade scenario.

In this scenario, you are starting the upgrade with the following items:

  • FortiManager 6.4.2
  • SD-WAN Orchestrator MEA 6.4.1
To upgrade SD-WAN Orchestrator MEA by using the CLI:
  1. Ensure that FortiManager has been upgraded to 6.4.2.
  2. In the FortiManager banner, click the CLI console button located in the top-right corner.

    The CLI Console opens.

  3. Run the following command:

    diagnose docker upgrade sdwancontroller

    SD-WAN Orchestrator MEA is upgraded to 6.4.1 r2.