Fortinet black logo

Resolved Issues

6.4.2
Copy Link
Copy Doc ID 4714bd43-dda8-11ea-96b9-00505692583a:156348
Download PDF

Resolved Issues

The following issues have been fixed in 6.4.1 r2. For inquires about a particular bug, please contact Customer Service & Support.

Bug ID

Description

640693

Onos login page still displays during SD-WAN Orchestrator MEA startup.

638366

[Project_6.4.0] Remove the Edit icon for SD-WAN Orchestrator MEA generated address/addrgrp when adding a business rule.

644134

[Project_6.4.0] Business rule config service is always included in script, even if no changes in it.

637886

[Project_6.4.0_Stress env] Devices already added to the region can be added again.

656873

[Project_6.4.1] Change manual path from Internet link to MPLS link, and IPsec between two MPLS ports goes down.

643323

[Project_6.4.0] Show detail at hub is slow in stress test environment.

652323

[Project_6.4.1] Set add-route disable for IPsec tunnels when ADVPN is enabled.

652361

[Project_6.4.1] Suggest to set lower priority for MPLS WAN port in SD-WAN zone.

653415

[Project_6.4.0] If the FortiLink has members, SD-WAN Orchestrator MEA won't generate default switch VLANs.

654083

[Project_6.4.1] Cannot create and edit address/user/service/isdb objects in Business rule configuration page.

630303

[Project_6.4.0] When log content is too long, the CVS entry is disordered with Excel2016.

644377

FortiGate 60F added by Model device can't show sync details.

631226

[Project_6.4.0] If an SSID security mode is set to WPA3_SAE, and then set to OPEN or WPA2_PERSONAL a conflict occurs.

645045

[Project_6.4.0] Change the security mode from WPA3_SAE to WPA2_Personal causes a conflict.

645928

[Project_6.4.0] Conflict occurs when ISDB in FortiManager is not consistent with FortiGate.

645942

[Project_6.4.0] Enhance the procedure to deploy FortiSwitch to FortiGate, especially when they are already connected.

645633

[Project_6.4.0] If SD-WAN Orchestrator MEA is started, creating or upgrading an ADOM results in lost policy blocks.

644900

[Project_6.4.0] While creating an IP pool, the subnet conflict with FortiLink's default VLAN subnet causes an exception.

629620

[Project_6.4.0] Many src and dst address objects in business rules cannot be edited via the Edit icon followed.

634193

[Project_6.4.0] The device name that was last searched is always displayed in the Search box.

632887

[Project_6.4.0] Change a profile for a region, the FortiGate will be offline and online, but there is no log print offline or online record.

645347

[Project_6.4.0] While disabling sw/ap config override, if the FortiSwitch VLAN assign IP by IP Pool, it is unable to override.

644070

[Project_6.4.0] Generate FortiLink default switch VLAN while creating new profile.

645656

[Project_6.4.0] Devices are added to FMG and SD-WAN Orchestrator MEA via JSON API while sync failed, and also cannot be listed when adding devices to SD-WAN Orchestrator MEA.

Resolved Issues

The following issues have been fixed in 6.4.1 r2. For inquires about a particular bug, please contact Customer Service & Support.

Bug ID

Description

640693

Onos login page still displays during SD-WAN Orchestrator MEA startup.

638366

[Project_6.4.0] Remove the Edit icon for SD-WAN Orchestrator MEA generated address/addrgrp when adding a business rule.

644134

[Project_6.4.0] Business rule config service is always included in script, even if no changes in it.

637886

[Project_6.4.0_Stress env] Devices already added to the region can be added again.

656873

[Project_6.4.1] Change manual path from Internet link to MPLS link, and IPsec between two MPLS ports goes down.

643323

[Project_6.4.0] Show detail at hub is slow in stress test environment.

652323

[Project_6.4.1] Set add-route disable for IPsec tunnels when ADVPN is enabled.

652361

[Project_6.4.1] Suggest to set lower priority for MPLS WAN port in SD-WAN zone.

653415

[Project_6.4.0] If the FortiLink has members, SD-WAN Orchestrator MEA won't generate default switch VLANs.

654083

[Project_6.4.1] Cannot create and edit address/user/service/isdb objects in Business rule configuration page.

630303

[Project_6.4.0] When log content is too long, the CVS entry is disordered with Excel2016.

644377

FortiGate 60F added by Model device can't show sync details.

631226

[Project_6.4.0] If an SSID security mode is set to WPA3_SAE, and then set to OPEN or WPA2_PERSONAL a conflict occurs.

645045

[Project_6.4.0] Change the security mode from WPA3_SAE to WPA2_Personal causes a conflict.

645928

[Project_6.4.0] Conflict occurs when ISDB in FortiManager is not consistent with FortiGate.

645942

[Project_6.4.0] Enhance the procedure to deploy FortiSwitch to FortiGate, especially when they are already connected.

645633

[Project_6.4.0] If SD-WAN Orchestrator MEA is started, creating or upgrading an ADOM results in lost policy blocks.

644900

[Project_6.4.0] While creating an IP pool, the subnet conflict with FortiLink's default VLAN subnet causes an exception.

629620

[Project_6.4.0] Many src and dst address objects in business rules cannot be edited via the Edit icon followed.

634193

[Project_6.4.0] The device name that was last searched is always displayed in the Search box.

632887

[Project_6.4.0] Change a profile for a region, the FortiGate will be offline and online, but there is no log print offline or online record.

645347

[Project_6.4.0] While disabling sw/ap config override, if the FortiSwitch VLAN assign IP by IP Pool, it is unable to override.

644070

[Project_6.4.0] Generate FortiLink default switch VLAN while creating new profile.

645656

[Project_6.4.0] Devices are added to FMG and SD-WAN Orchestrator MEA via JSON API while sync failed, and also cannot be listed when adding devices to SD-WAN Orchestrator MEA.