Creating new LAN settings
When creating a profile, you can also create new LAN settings.
To create new LAN settings:
- Go to Configuration > Profile.
The list of profiles is displayed.
- Create a new profile, or open a profile for updating.
The Profile <name> dialog box is displayed.
- Click the Network tab.
The Network pane is displayed. For a description of the options, see Network tab.
- Expand the LAN section, and click +Create New.
The LAN dialog box is displayed.
Option
Description
Name
Type a name for the interface.
Port Type
Select the type of port.
Physical Port
Select the port number.
Allow Overlap Between Devices
Toggle on to allow overlap between devices. Toggle off to disable this feature.
IP Address
Available when Allow Overlap Between Devices is enabled.
IP Auto Assign
Available when Allow Overlap Between Devices is disabled.
Toggle on to automatically assign IP addresses. Toggle off to disable this feature.
VLAN ID
Available when Allow Overlap Between Devices is enabled.
IP Pool
Available when IP Auto Assign is enabled.
Specify a pool of IP addresses to be used for SD-WAN Orchestrator MEA to automatically assign.
Subnet Mask Length
Available when IP Auto Assign is enabled.
Specify the length of the subnet mask.
DHCP Mode
Choose from:
- None
- Server
- Relay
Access Types
Select the types of access to allow on the interface.
- Complete the options, and click OK.
The WAN settings are created.