FortiManager should be able to handle upgrading more than 10 APs at once.

Dynamic VLAN option is not saved in SSID in AP Manager.

There may be a DFS Channel mismatch between FortiManager and FortiGate for FAP-223E.

Adding FortiGate using custom admin profile may fail to list FAP in AP Manager.

FortiManager is able to create SSID which cannot be deleted after.

DHCP server is incorrectly created for Bridge SSID.

Interface cannot create more than 48 IP-MAC bindings in DHCP reservation from GUI.

Device joined telemetry not showing on FortiManager under Telemetry group.

FortiManager may not be able to edit VDOM link interface from VDOM level.

Pac file data limited to 4000 characters under CLI Configuration.

Security Fabric Connection option is removed from VLAN interface after changes are applied.

SD-WAN Monitor is showing effect of exceeded SLA even if when it is disabled.

Changing a certificate on FortiGate triggers auto-update that may incorrectly update partial configuration on multiple VDOMs.

FortiManager cannot work with socket-size 0 and changes it to 1 automatically.

After auto-conf IPv6 address is changed on FortiGate, the address is not updated into device database.

Return button is not working when viewing HA mode.

Importing a policy may report conflict for the default SSH CA certificates.

Retrieve may fail on FortiGate cluster with "Failed to reload configuration. invalid value" error.

Fabric view may stuck at loading.

FortiGate 7000 may not be added and result with failure to update device information.

No IPv6 format in router GUI for BGP.

FortiManager is unable to deauthorize explicit proxy user(s).

Policy Lookup shows an error even though device is in sync.

Mapping interface containing "/" results error "Object does not exist" during import policy.

CLI Template is not able to install same name interface using vpn ipsec phase1-interface and config system ipsec-aggregate.

FortiManager cannot view full list of Extenders.

SD-WAN > Monitor may hang for an ADOM with 1500 devices.

SD-WAN monitor may stuck loading when the admin user belongs to device group.

SD-WAN monitor keeps loading and not displaying anything in backup mode ADOM.

FortiManager may fail to add another FortiManager in Fabric ADOM.

FortiManager may not be able to configure any value on the access list prefix.

Allow access is missing under interface on AWS FortiGate and may cause installation to fail.

IPsec VPN Phase-1 tunnel interface is not added in VDOM interface list with long VDOM name.

FortiManager fails to retrieve FSSO user groups via FortiGate

FortiManager is lacking API for policy consistency check.

When configuring web filter rating override, the configuration is pushed to all the VDOMs even when web filter is not used.

Consolidated policy is missing implicit deny policy.

FortiManager ADOM web filter profile configuration promoted to Global database does not rename associated FortiGuard local categories.

FortiManager is unable to see dynamic mapping for Local Certificate if workflow session is created.

FortiManager should not change default value of scan-mode and ssl-ssh-profile/inspection-mode when installing v6.0 policy package to v6.2.

FortiManager is unable to create VIPv6 virtual server objects.

Importing groups from Aruba ClearPass may fail.

While editing policy from Policy Package, it is not possible to select SSL/SSH Inspection profile.

FortiManager is unable to export 3000 Policies to Excel Spreadsheet and return error InternalError: "too much recursion".

FortiManager is missing IPV6 none values after modifying policy.

Username cannot exceed 35 characters.

Promoting object groups to global may attempt to install contained objects back to ADOM upon global policy package assignment.

Existing objects may disappear while editing policy and adding new one in batch mode.

FortiManager dynamic object filter generator is adding a "s" at the end of tag resulting in non-working object.

No connection request is sent out for ClearPass connector in ADOM.

Package with address group in SSL inspection cannot be installed to FortiGate.

Source or destination address may not show in policy.

FortiManager may show entry IDs instead of names when an obsolete internet service is selected.

Policy Consistency Check may return duplicate address object names.

Policy Package Diff does not show user or admin details.

Fabric SDN Connector is installed on FortiGate even if it is not in used.

Installing mobile token that does not belong to target FortiGate may fail.

FortiManager may not show interface delta changes.

User may not be able to install policy package due to change with external interface with VIP settings.

Install may fail with error "Associated Interface conflict detected!"

FortiManager may not install ADSL vci and VPI to FWF-60E-DSL.

Zone validation in re-Install Policy is not saving the user choice and deleting all related policies.

Default hbdev values may change after upgrade.

Install fails for subnet overlap IP between two interfaces.

Scrolling in install preview is not smooth and may get stuck.

Install copy may fail with error message "ftgd-wf - - The category is already set in another filter."

Installation fails with "wireless-controller vap mesh-backhaul" setting despite setting being disabled on FortiManager.

VPN Manager changes may result in unnecessary FortiGate configuration changes.

When installing configuration to a device after Auto link, FortiManager may send incorrect system ntp commands causing install to fail.

The adom-rev-auto-delete option may not work to automatically delete revisions.

After locked on a device, FortiManager cannot show the list of devices to run a script.

HA secondary device does not update FortiMeter license.

FortiGate-VM64-AZURE may not be listed in firmware image page.

FortiManager may not honor the fgd-pull-interval and adjust download times accordingly.

FortiManager may show incorrect firmware upgrade path.

FortiManager may ignore FortiGuard update schedule.

FortiManager Enforce Firmware Version may fail to upgrade FortGate to a custom build.

FortiManager may have no control to Fabric View in admin profile.

Certificate request CRS does not include the SAN DNS.

FortiManager two-factor authentication admin login is missing the option for FTK Mobile push notification authentication.

FortiManager should show details in the fnbamd debug if login fails due to trusted hosts.

FortiManager prompts error while importing CA certificate.

Changes made by ADOM upgrade may not update "Last Modified" date/time and user admin.

There are many "cdb event log for object changed" in event logs after upgrade.

After HA failover, the new master may have incorrect policies.

FortiManager HA may go out of synchronization periodically based on the logs.

Changing a non super user password may not take effect after an upgrade.

FortiManager should be able to manage phase2 selectors separately.

There is no "XAUTH USER" column in VPN Manager Monitor.

SSLVPN > Edit SSLVPN Settings > IP Range only shows configuration from ADOM database objects.

VPN Manager error Peer type cannot be peer when authentication method is pre-share key.

User should be able to select the OS to allow or deny an SSL-VPN tunnel connection.

Installation may fail when Dialup VPN interface is PPPoE logical interface.