Fortinet Document Library

Version:


Table of Contents

6.4.1
Download PDF
Copy Link

Resolved Issues

The following issues have been fixed in 6.4.1. For inquires about a particular bug, please contact Customer Service & Support.

Bug ID

Description

592819 [Project_6.4.0] IP Pool disordered in Global Routing table.
599725 [Project_6.4.0] When dragging a device to move its position, the icon often moves back to its original position.
600436 [Project_6.4.0] Set WAN port type for MPLS and Private Line to enabled, and no underlay information is displayed in single device monitor.
601534 [Project_6.4.0] Path down does not trigger log.
604355 [Project_6.4.0] Sometimes path lines disappear especially when synchronizing configurations.
606420 [Project_6.4.0] Dynamic sync is sometimes not triggered.
614296 [Project_6.4.0_Stress env] The page gets stuck when the region device is expanded in stress environment.
618438 [Project_6.4.0] Unknown reason causes Internal Server Error.
618894 [Project_6.4.0](FortiAP) Unable to add AP profile on hardswitch interface.
619673 [Project_6.4.0] Unable to add FortiGate device by serial number.
620184 [Project_6.4.0] ADOM 6.4 should remove profile for 30E/50E/51E/52E.
621599 [Project_6.4.0] After FortiGate is added to SD-WAN Orchestrator, there is a chance to be offline.
622605 [Project_6.4.0] Synchronization conflict occurs when an SDWAN member is used by an SDWAN rule, but the interface is set to disabled on profile.
622606 [Project_6.4.0] Synchronization failed, if device has static ports with enabled DHCP server, but control what changes them to DHCP or PPoE mode.
622688 [Project_6.4.0] Set tunnel IP failed as Subnets overlap between 'port1-E' with primary IP of 'port3-E'.
623440 [Project_6.4.0] When click SD-WAN Orchestrator GUI Maintenance > Upgrade > Check for updates, sometimes it logs out and skips to FortiManager main page.
623679 [Project_6.4.0] Conflict held while synchronizing FortiGate 80D. Set switch-controller-feature none [invalid value].
623686 [Project_6.4.0_Stress env] Failed to back up configuration in stress environment.
623694 [Project_6.4.0_Stress env] The device will automatically flash in Topology view > Region view.
623824 [Project_6.4.0] Synchronization conflict occurs when deleting a device and the device is referred by a custom internet service on other device.
624115 [Project_6.4.0] Unset IP address on a port will fail if there is a secondary IP on the port.
624553 [Project_6.4.0] SD-WAN Orchestrator installation failed due to FortiManager script deleting IPsec interface failure.
624842 [Project_6.4.0] Synchronization conflict occurs if device already has a VPN tunnel and the VPN interface is referred by firewall policy.
624943 [Project_6.4.0](FortiAP) It is Unable to create an SSID with security mode WPA3_SAE.
624964 [Project_6.4.0](FortiAP) It is unable to delete SSIDs.
625537 [Project_6.4.0] If business rule includes some applications, there will be conflict.
625572 [Project_6.4.0](FortiAP) While binding the wrong AP model profile, the AP is still automatically authorized on FortiGate.
625617 [Project_6.4.0] Specifying a region for "Backhaul to Group" in a business rule, but links to all the regions are added.
625745 [Project_6.4.0] From Device page, configure SSID static IP, and it is unable to deploy the IP address to FortiGate.
625748 [Project_6.4.0] Delete the SSID from Device page, and it won't synchronize to FortiGate.
625757 [Project_6.4.0] While importing device from csv file, FortiGate VM always fails.
625966 [Project_6.4.0] Change business rule from SLA=Default_Google Search to others causes synchronization conflict.
626051 [Project_6.4.0] Business rule cannot see script, if it contains special ISDBs.
626457 [Project_6.4.0](FortiSwitch) While adding more than 1 Switch and AP to SD-WAN Orchestrator, binding of switch template and AP profile will fail.
627570 [Project_6.4.0] Failed to deploy device dynamically: dynamic deploy(FGT tunnel api) error.
627600 [Project_6.4.0] After adding unauthorized devices, the setting page won't close.
627972 [Project_6.4.0] Failed to install business rule when selecting some destination address objects.
628235 [Project_6.4.0] When Device WAN port override is enabled, Estimated upstream bandwidth and downstream will be restored to 0 Kbps.
628818 [Project_6.4.0](FortiAP) Unable to automatically authorize FortiAP.
629178 [Project_6.4.0](FortiSwitch) It should not allow users to set the same VLAN to both native VLAN and allow VLAN.
629522 [Project_6.4.0] When the page window is reduced, the right-side content of a webpage cannot be seen.
629566 [Project_6.4.0] Delete a device and install configuration. A conflict is triggered as reason(> delete "DEVICE_6" [used. detail: delete.
629884 [Project_6.4.0](FortiSwitch) While creating a FSW VLAN, it only deploys to FortiManager; it does not deploy to FortiGate.
630341 [Project_6.4.0] While turning off SW/AP Configuration, SD-WAN Orchestrator won't unbind SW/AP template.
630818 [Project_6.4.0] Once the configuration is synchronized, FortiGate sometimes goes offline and online again.
631032 [Project_6.4.0] Change profiles for devices in a region for many times, and sometimes a device will be deleted.
631090 [Project_6.4.0] While disabling device LAN override, SSID IP address won't set by profile setting.
631149 [Project_6.4.0] If the auto-generated address or addrgrp is referenced in business rule, deleting the device will cause conflict.
631359 [Project_6.4.0] SD-WAN Orchestrator does not work normally in AWS.
631782 /32 Is not allowed for IP Address field in WAN Interfaces.
631991 [Project_6.4.0] When a device is referenced in business rules by other devices, moving it from one ADOM to another will fail.
632153 [Project_6.4.0_Stress env] First online synchronization failed sometimes.
632863 [Project_6.4.0] Dynamic interface update failed.
633793 [Project_6.4.0] Manual password should not allow special characters.
633797 [Project_6.4.0] While adding a device, the profile won't display immediately.
634756 [Project_6.4.0] In single device > Underlay Link of port2, click Drilldown & show overlay and port1 overlay info is displayed.
634867 [Project_6.4.0] While setting the Password function to No Change, the password field changes to read-only and can't be edited.
635507 [Project_6.4.0] While changing FortiGate profile, it should unbind template first.
635544 [Project_6.4.0] Some AP prefixes are not mapping, and AP can't successfully authorize.
635772 If the key of cookies in FMG GUI API changes, then SD-WAN Orchestrator may not start up.
636660 [Project_6.4.0] After enabling fortilink and managed FortiSwitch, changing the profile with default settings will cause conflict.
636758 [Project_6.4.0] While enabling client limit, the maximum client count cannot be set to 4294967295.
637182 [Project_6.4.0] AP profile is unable to be removed in FortiGate 200E.
637224 [Project_6.4.0] (SW/AP) Change Auto Power Level to Auto TX Power on SW/AP Profile GUI.
637239 [Project_6.4.0] Unable to add KVM FortiGate to SD-WAN Orchestrator.
637297 [Project_6.4.0] Several filters do not work well in Business rule view page.
637304 [Project_6.4.0] Create nearly all FortiManager objects in business rule, and dropdown list will fail due to the reference page error.
637629 [Project_6.4.0] (SW/AP) While enabling Auto TX Power, the TX Power High cannot be less than TX Power Low.
637800 [Project_6.4.0] Cannot unselect after the user selects a device filter.
638106 [Project_6.4.0] Script execution misalignment causes conflict.
639004 [Project_6.4.0] The max clients value should not be set over 4294967295.
639017 [Project_6.4.0] While adding multiple FortiSwitch units, the configuration will be out of order.
639347 [Project_6.4.0] Adding FortiGate 60E to SD-WAN Orchestrator will cause conflict.
639390 [Project_6.4.0] Restored FortiManager failed to recover SD-WAN Orchestrator configuration.
639438 [Project_6.4.0] Several filters do not work well in Business rule view page.
639666 [Project_6.4.0] Due to unknown reasons, Synchronizing status is always displayed after synchronizing all.

Resolved Issues

The following issues have been fixed in 6.4.1. For inquires about a particular bug, please contact Customer Service & Support.

Bug ID

Description

592819 [Project_6.4.0] IP Pool disordered in Global Routing table.
599725 [Project_6.4.0] When dragging a device to move its position, the icon often moves back to its original position.
600436 [Project_6.4.0] Set WAN port type for MPLS and Private Line to enabled, and no underlay information is displayed in single device monitor.
601534 [Project_6.4.0] Path down does not trigger log.
604355 [Project_6.4.0] Sometimes path lines disappear especially when synchronizing configurations.
606420 [Project_6.4.0] Dynamic sync is sometimes not triggered.
614296 [Project_6.4.0_Stress env] The page gets stuck when the region device is expanded in stress environment.
618438 [Project_6.4.0] Unknown reason causes Internal Server Error.
618894 [Project_6.4.0](FortiAP) Unable to add AP profile on hardswitch interface.
619673 [Project_6.4.0] Unable to add FortiGate device by serial number.
620184 [Project_6.4.0] ADOM 6.4 should remove profile for 30E/50E/51E/52E.
621599 [Project_6.4.0] After FortiGate is added to SD-WAN Orchestrator, there is a chance to be offline.
622605 [Project_6.4.0] Synchronization conflict occurs when an SDWAN member is used by an SDWAN rule, but the interface is set to disabled on profile.
622606 [Project_6.4.0] Synchronization failed, if device has static ports with enabled DHCP server, but control what changes them to DHCP or PPoE mode.
622688 [Project_6.4.0] Set tunnel IP failed as Subnets overlap between 'port1-E' with primary IP of 'port3-E'.
623440 [Project_6.4.0] When click SD-WAN Orchestrator GUI Maintenance > Upgrade > Check for updates, sometimes it logs out and skips to FortiManager main page.
623679 [Project_6.4.0] Conflict held while synchronizing FortiGate 80D. Set switch-controller-feature none [invalid value].
623686 [Project_6.4.0_Stress env] Failed to back up configuration in stress environment.
623694 [Project_6.4.0_Stress env] The device will automatically flash in Topology view > Region view.
623824 [Project_6.4.0] Synchronization conflict occurs when deleting a device and the device is referred by a custom internet service on other device.
624115 [Project_6.4.0] Unset IP address on a port will fail if there is a secondary IP on the port.
624553 [Project_6.4.0] SD-WAN Orchestrator installation failed due to FortiManager script deleting IPsec interface failure.
624842 [Project_6.4.0] Synchronization conflict occurs if device already has a VPN tunnel and the VPN interface is referred by firewall policy.
624943 [Project_6.4.0](FortiAP) It is Unable to create an SSID with security mode WPA3_SAE.
624964 [Project_6.4.0](FortiAP) It is unable to delete SSIDs.
625537 [Project_6.4.0] If business rule includes some applications, there will be conflict.
625572 [Project_6.4.0](FortiAP) While binding the wrong AP model profile, the AP is still automatically authorized on FortiGate.
625617 [Project_6.4.0] Specifying a region for "Backhaul to Group" in a business rule, but links to all the regions are added.
625745 [Project_6.4.0] From Device page, configure SSID static IP, and it is unable to deploy the IP address to FortiGate.
625748 [Project_6.4.0] Delete the SSID from Device page, and it won't synchronize to FortiGate.
625757 [Project_6.4.0] While importing device from csv file, FortiGate VM always fails.
625966 [Project_6.4.0] Change business rule from SLA=Default_Google Search to others causes synchronization conflict.
626051 [Project_6.4.0] Business rule cannot see script, if it contains special ISDBs.
626457 [Project_6.4.0](FortiSwitch) While adding more than 1 Switch and AP to SD-WAN Orchestrator, binding of switch template and AP profile will fail.
627570 [Project_6.4.0] Failed to deploy device dynamically: dynamic deploy(FGT tunnel api) error.
627600 [Project_6.4.0] After adding unauthorized devices, the setting page won't close.
627972 [Project_6.4.0] Failed to install business rule when selecting some destination address objects.
628235 [Project_6.4.0] When Device WAN port override is enabled, Estimated upstream bandwidth and downstream will be restored to 0 Kbps.
628818 [Project_6.4.0](FortiAP) Unable to automatically authorize FortiAP.
629178 [Project_6.4.0](FortiSwitch) It should not allow users to set the same VLAN to both native VLAN and allow VLAN.
629522 [Project_6.4.0] When the page window is reduced, the right-side content of a webpage cannot be seen.
629566 [Project_6.4.0] Delete a device and install configuration. A conflict is triggered as reason(> delete "DEVICE_6" [used. detail: delete.
629884 [Project_6.4.0](FortiSwitch) While creating a FSW VLAN, it only deploys to FortiManager; it does not deploy to FortiGate.
630341 [Project_6.4.0] While turning off SW/AP Configuration, SD-WAN Orchestrator won't unbind SW/AP template.
630818 [Project_6.4.0] Once the configuration is synchronized, FortiGate sometimes goes offline and online again.
631032 [Project_6.4.0] Change profiles for devices in a region for many times, and sometimes a device will be deleted.
631090 [Project_6.4.0] While disabling device LAN override, SSID IP address won't set by profile setting.
631149 [Project_6.4.0] If the auto-generated address or addrgrp is referenced in business rule, deleting the device will cause conflict.
631359 [Project_6.4.0] SD-WAN Orchestrator does not work normally in AWS.
631782 /32 Is not allowed for IP Address field in WAN Interfaces.
631991 [Project_6.4.0] When a device is referenced in business rules by other devices, moving it from one ADOM to another will fail.
632153 [Project_6.4.0_Stress env] First online synchronization failed sometimes.
632863 [Project_6.4.0] Dynamic interface update failed.
633793 [Project_6.4.0] Manual password should not allow special characters.
633797 [Project_6.4.0] While adding a device, the profile won't display immediately.
634756 [Project_6.4.0] In single device > Underlay Link of port2, click Drilldown & show overlay and port1 overlay info is displayed.
634867 [Project_6.4.0] While setting the Password function to No Change, the password field changes to read-only and can't be edited.
635507 [Project_6.4.0] While changing FortiGate profile, it should unbind template first.
635544 [Project_6.4.0] Some AP prefixes are not mapping, and AP can't successfully authorize.
635772 If the key of cookies in FMG GUI API changes, then SD-WAN Orchestrator may not start up.
636660 [Project_6.4.0] After enabling fortilink and managed FortiSwitch, changing the profile with default settings will cause conflict.
636758 [Project_6.4.0] While enabling client limit, the maximum client count cannot be set to 4294967295.
637182 [Project_6.4.0] AP profile is unable to be removed in FortiGate 200E.
637224 [Project_6.4.0] (SW/AP) Change Auto Power Level to Auto TX Power on SW/AP Profile GUI.
637239 [Project_6.4.0] Unable to add KVM FortiGate to SD-WAN Orchestrator.
637297 [Project_6.4.0] Several filters do not work well in Business rule view page.
637304 [Project_6.4.0] Create nearly all FortiManager objects in business rule, and dropdown list will fail due to the reference page error.
637629 [Project_6.4.0] (SW/AP) While enabling Auto TX Power, the TX Power High cannot be less than TX Power Low.
637800 [Project_6.4.0] Cannot unselect after the user selects a device filter.
638106 [Project_6.4.0] Script execution misalignment causes conflict.
639004 [Project_6.4.0] The max clients value should not be set over 4294967295.
639017 [Project_6.4.0] While adding multiple FortiSwitch units, the configuration will be out of order.
639347 [Project_6.4.0] Adding FortiGate 60E to SD-WAN Orchestrator will cause conflict.
639390 [Project_6.4.0] Restored FortiManager failed to recover SD-WAN Orchestrator configuration.
639438 [Project_6.4.0] Several filters do not work well in Business rule view page.
639666 [Project_6.4.0] Due to unknown reasons, Synchronizing status is always displayed after synchronizing all.