Fortinet black logo

Administration Guide

Health-check servers per-device mapping

Health-check servers per-device mapping

Adding a Health-Check Server makes it the default server for all VDOMs on the FortiGate device. With per-device mapping, you can add a different Health-Check Server for each VDOM on the FortiGate device.

To add health-check per-device mapping:
  1. Ensure that you are in the correct ADOM and that central SD-WAN management is enabled.
  2. Go to Device Manager > SD-WAN > Health-Check Servers.
  3. Click Create New in the content pane toolbar. The Create New WAN Detect Server page opens.
  4. Enable Per-Device Mapping.
  5. Click Create New in the per-device mapping toolbar.

  6. Select a Mapped Device from the drop-down list.
  7. Enter the Detect Server IP address, and add additional detect servers as needed.
  8. Click OK.
To edit health-check per-device mapping:
  1. If using ADOMs, ensure that you are in the correct ADOM.
  2. Go to Device Manager > SD-WAN > Health-Check Servers.
  3. Click Create New in the content pane toolbar, or right-click and select Create New. The Create New WAN Detect Server page opens.
  4. Select a per device mapping then click Edit in the per-device mapping toolbar.
  5. Edit the settings as required, then click OK.
To delete health-check per-device mappings:
  1. If using ADOMs, ensure that you are in the correct ADOM.
  2. Go to Device Manager > SD-WAN > Health-Check Servers.
  3. Click Create New in the content pane toolbar, or right-click and select Create New. The Create New WAN Detect Server page opens.
  4. Select one or more per device mapping, then click Delete in the per-device mapping toolbar.
  5. Click OK in the confirmation dialog box to delete the mapping or mappings.

Health-check servers per-device mapping

Adding a Health-Check Server makes it the default server for all VDOMs on the FortiGate device. With per-device mapping, you can add a different Health-Check Server for each VDOM on the FortiGate device.

To add health-check per-device mapping:
  1. Ensure that you are in the correct ADOM and that central SD-WAN management is enabled.
  2. Go to Device Manager > SD-WAN > Health-Check Servers.
  3. Click Create New in the content pane toolbar. The Create New WAN Detect Server page opens.
  4. Enable Per-Device Mapping.
  5. Click Create New in the per-device mapping toolbar.

  6. Select a Mapped Device from the drop-down list.
  7. Enter the Detect Server IP address, and add additional detect servers as needed.
  8. Click OK.
To edit health-check per-device mapping:
  1. If using ADOMs, ensure that you are in the correct ADOM.
  2. Go to Device Manager > SD-WAN > Health-Check Servers.
  3. Click Create New in the content pane toolbar, or right-click and select Create New. The Create New WAN Detect Server page opens.
  4. Select a per device mapping then click Edit in the per-device mapping toolbar.
  5. Edit the settings as required, then click OK.
To delete health-check per-device mappings:
  1. If using ADOMs, ensure that you are in the correct ADOM.
  2. Go to Device Manager > SD-WAN > Health-Check Servers.
  3. Click Create New in the content pane toolbar, or right-click and select Create New. The Create New WAN Detect Server page opens.
  4. Select one or more per device mapping, then click Delete in the per-device mapping toolbar.
  5. Click OK in the confirmation dialog box to delete the mapping or mappings.