Fortinet Document Library

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:


Table of Contents

Administration Guide

Enabling SD-WAN central management

You can enable SD-WAN central management per ADOM. When enabled, the SD-WAN tab shows the following items on the left pane:

  • SD-WAN Templates
  • Interface Members
  • Health-Check Servers
  • BGP Neighbors
  • Monitor
To enable central SD-WAN management:
  1. Go to System Settings > All ADOMs.
  2. Double-click the ADOM to open it for editing.

    The Edit ADOM window opens. (See Editing an ADOM.)

  3. Beside Central Management, select the SD-WAN checkbox, and click OK.

    SD-WAN per-device management is disabled for the ADOM, and SD-WAN central management is enabled for the ADOM.

  4. Go to Device Manager > SD-WAN, and notice that Central Management is displayed in the top-right corner.

Enabling SD-WAN central management

You can enable SD-WAN central management per ADOM. When enabled, the SD-WAN tab shows the following items on the left pane:

  • SD-WAN Templates
  • Interface Members
  • Health-Check Servers
  • BGP Neighbors
  • Monitor
To enable central SD-WAN management:
  1. Go to System Settings > All ADOMs.
  2. Double-click the ADOM to open it for editing.

    The Edit ADOM window opens. (See Editing an ADOM.)

  3. Beside Central Management, select the SD-WAN checkbox, and click OK.

    SD-WAN per-device management is disabled for the ADOM, and SD-WAN central management is enabled for the ADOM.

  4. Go to Device Manager > SD-WAN, and notice that Central Management is displayed in the top-right corner.