Fortinet Document Library

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:


Table of Contents

Administration Guide

Interface members per-device mapping

To add WAN interface per-device mapping:
  1. Ensure that you are in the correct ADOM and that SD-WAN central management is enabled for the ADOM.

  2. Go to Device Manager > SD-WAN > Interface Members.
  3. Click Create New in the content pane toolbar, or right-click and select Create New. The Create New WAN Interface page opens.
  4. Enable Per-Device Mapping.
  5. Click Create New in the per-device mapping toolbar. The Create New Interface Member dialog-box opens.

  6. Select a Mapped Device then an Interface from the drop-down lists.
  7. Enter the Gateway IP address, Weight, Volume, and Advanced Options.
  8. Click OK.
To edit WAN interface per-device mapping:
  1. Ensure that you are in the correct ADOM and that SD-WAN central management is enabled for the ADOM.

  2. Go to Device Manager > SD-WAN > Interface Members.
  3. Click Create New in the content pane toolbar, or right-click and select Create New. The Create New WAN Interface page opens.
  4. Select a per device mapping then click Edit in the per-device mapping toolbar. The Edit Interface Member dialog-box opens.
  5. Edit the settings as required, then click OK.
To delete WAN interface per-device mappings:
  1. Ensure that you are in the correct ADOM and that SD-WAN central management is enabled for the ADOM.

  2. Go to Device Manager > SD-WAN > Interface Members.
  3. Click Create New in the content pane toolbar, or right-click and select Create New. The Create New WAN Interface page opens.
  4. Select one or more per device mapping, then click Delete in the per-device mapping toolbar.
  5. Click OK in the confirmation dialog box to delete the mapping or mappings.

Interface members per-device mapping

To add WAN interface per-device mapping:
  1. Ensure that you are in the correct ADOM and that SD-WAN central management is enabled for the ADOM.

  2. Go to Device Manager > SD-WAN > Interface Members.
  3. Click Create New in the content pane toolbar, or right-click and select Create New. The Create New WAN Interface page opens.
  4. Enable Per-Device Mapping.
  5. Click Create New in the per-device mapping toolbar. The Create New Interface Member dialog-box opens.

  6. Select a Mapped Device then an Interface from the drop-down lists.
  7. Enter the Gateway IP address, Weight, Volume, and Advanced Options.
  8. Click OK.
To edit WAN interface per-device mapping:
  1. Ensure that you are in the correct ADOM and that SD-WAN central management is enabled for the ADOM.

  2. Go to Device Manager > SD-WAN > Interface Members.
  3. Click Create New in the content pane toolbar, or right-click and select Create New. The Create New WAN Interface page opens.
  4. Select a per device mapping then click Edit in the per-device mapping toolbar. The Edit Interface Member dialog-box opens.
  5. Edit the settings as required, then click OK.
To delete WAN interface per-device mappings:
  1. Ensure that you are in the correct ADOM and that SD-WAN central management is enabled for the ADOM.

  2. Go to Device Manager > SD-WAN > Interface Members.
  3. Click Create New in the content pane toolbar, or right-click and select Create New. The Create New WAN Interface page opens.
  4. Select one or more per device mapping, then click Delete in the per-device mapping toolbar.
  5. Click OK in the confirmation dialog box to delete the mapping or mappings.