Fortinet Document Library

Version:


Table of Contents

SD-WAN Orchestrator 6.4.0 Administration Guide

6.4.0
Download PDF
Copy Link

Creating new LAN settings

When creating a profile, you can also create new LAN settings. 

To create new LAN settings:
  1. Go to Configuration > Profile.

    The list of profiles is displayed.

  2. Create a new profile, or open a profile for updating.

    The Profile <name> dialog box is displayed.

  3. Click the Network tab.

    The Network pane is displayed. For a description of the options, see Network tab.

  4. Expand the LAN section, and click +Create New.

    The LAN dialog box is displayed.

    Option

    Description

    Name

    Type a name for the interface.

    Port Type

    Select the type of port.

    Physical Port

    Select the port number.

    Allow Overlap Between Devices

    Toggle on to allow overlap between devices. Toggle off to disable this feature.

    IP Address

    Available when Allow Overlap Between Devices is enabled.

    IP Auto Assign

    Available when Allow Overlap Between Devices is disabled.

    Toggle on to automatically assign IP addresses. Toggle off to disable this feature.

    VLAN ID

    Available when Allow Overlap Between Devices is enabled.

    IP Pool

    Available when IP Auto Assign is enabled.

    Specify a pool of IP addresses to be used for SD-WAN Orchestrator MEA to automatically assign.

    Subnet Mask Length

    Available when IP Auto Assign is enabled.

    Specify the length of the subnet mask.

    DHCP Mode

    Choose from:

    • None
    • Server
    • Relay

    Access Types

    Select the types of access to allow on the interface.

  5. Complete the options, and click OK.

    The WAN settings are created.

Creating new LAN settings

When creating a profile, you can also create new LAN settings. 

To create new LAN settings:
  1. Go to Configuration > Profile.

    The list of profiles is displayed.

  2. Create a new profile, or open a profile for updating.

    The Profile <name> dialog box is displayed.

  3. Click the Network tab.

    The Network pane is displayed. For a description of the options, see Network tab.

  4. Expand the LAN section, and click +Create New.

    The LAN dialog box is displayed.

    Option

    Description

    Name

    Type a name for the interface.

    Port Type

    Select the type of port.

    Physical Port

    Select the port number.

    Allow Overlap Between Devices

    Toggle on to allow overlap between devices. Toggle off to disable this feature.

    IP Address

    Available when Allow Overlap Between Devices is enabled.

    IP Auto Assign

    Available when Allow Overlap Between Devices is disabled.

    Toggle on to automatically assign IP addresses. Toggle off to disable this feature.

    VLAN ID

    Available when Allow Overlap Between Devices is enabled.

    IP Pool

    Available when IP Auto Assign is enabled.

    Specify a pool of IP addresses to be used for SD-WAN Orchestrator MEA to automatically assign.

    Subnet Mask Length

    Available when IP Auto Assign is enabled.

    Specify the length of the subnet mask.

    DHCP Mode

    Choose from:

    • None
    • Server
    • Relay

    Access Types

    Select the types of access to allow on the interface.

  5. Complete the options, and click OK.

    The WAN settings are created.