Fortinet Document Library

Version:


Table of Contents

SD-WAN Orchestrator 6.4.0 Administration Guide

6.4.0
Download PDF
Copy Link

Adding NTP servers

You can add an NTP server to SD-WAN Orchestrator MEA, and then select the server in profiles and devices.

To add NTP servers:
  1. Go to Configuration > Shared Resources > System > NTP Server.
  2. In the toolbar, click Create New.
  3. Configure the NTP server settings, and click OK.

    Option

    Description

    Name Enter a name for the NTP server.
    Address Type From the dropdown, select IP or FQDN.
    Address Enter the server's IP address or host name.
    NTP v3 Toggle On to enable NTP v3.
    Authentication Toggle On to enable authentication.

    Key

    Available when Authentication is enabled.

    Key ID

    Available when Authentication is enabled.

Adding NTP servers

You can add an NTP server to SD-WAN Orchestrator MEA, and then select the server in profiles and devices.

To add NTP servers:
  1. Go to Configuration > Shared Resources > System > NTP Server.
  2. In the toolbar, click Create New.
  3. Configure the NTP server settings, and click OK.

    Option

    Description

    Name Enter a name for the NTP server.
    Address Type From the dropdown, select IP or FQDN.
    Address Enter the server's IP address or host name.
    NTP v3 Toggle On to enable NTP v3.
    Authentication Toggle On to enable authentication.

    Key

    Available when Authentication is enabled.

    Key ID

    Available when Authentication is enabled.