Creating SD-WAN templates

Create an SD-WAN template with the following zones and interface members for branch devices:

Zone	Interface members
virtual-wan-link	port2 port3
vpn	OL_INET_0 OL_MPLS_0

After you create the template, assign the template to the branch devices.

To create an SD-WAN template for branch devices:

1. Go to Device Manager > SD-WAN > SD-WAN Template.
2. In the toolbar, click Create New. The Create New page opens.
3. In the Name box, type a name for the template, such as sd-wan-01.
4. Create an SD-WAN zone named vpn:
   1. Under Interface Members, click Create New > SD-WAN Zone.
   2. In the Name box, type a name, such as VPN, and click OK.

      The zone is created

5. Add SD-WAN members to the vpn zone:
   1. Under Interface Members, click Create New > SD-WAN Member.
   2. In the Sequence Number box, type a number for the interface.
   3. In the Interface Member box, select the interface member, such as OL_INET_0.
   4. In the SD-WAN Zone box, select vpn, and click OK.

      The interface member is added to the zone.

   5. Repeat this procedure to add the OL_MPLS_0 interface member to the zone.
6. Add the following SD-WAN members to the virtual-wan-link zone: port2, port3.

   

7. Click OK to save the template.

To assign the SD-WAN template to the branch devices:

1. In the SD-WAN Templates content pane, select the SD-WAN template.
2. In the toolbar, click Assign to Device. The Assign to Device window appears.
3. Select the branch devices, and click OK.