fmpolicy

Use these commands to perform policy and object related actions:

fmpolicy check-upgrade-object

Use this command to check/upgrade objects by syntax.

Syntax

execute fmpolicy check-upgrade-object manual {checking | fixing} {basic | auto | misc | full}

execute fmpolicy check-upgrade-object report

execute fmpolicy check-upgrade-object reset

Variable	Description
<action>	Enter the auto upgrade action: manual: run auto-upgrade manually. report: show checking/upgrade report. reset: cleanup saved checking/upgrade status
{checking | fixing}	checking: only do checking. fixing: checking and fixing.
{basic | auto | misc | full}	basic: only do basic (know cases) checking/fixing. auto: only do auto (syntax based) checking/fixing. misc: only do misc (know cases) checking/fixing. full: do a full basic/auto/misc checking/fixing.

fmgpolicy clone-adom-object

Use this command to clone an ADOM object.

Syntax

execute fmpolicy clone-adom-object <src-adom> <category> <key> <target-adom> <new-key>

Variable	Description
<arc-adom>	Enter the name of the source ADOM.
<category>	Enter the name of the category in the ADOM.
<key>	Enter the name of the object key.
<target-adom>	Enter the name of the target ADOM.
<new-key>	Enter the name of the new key.

fmpolicy copy-adom-object

Use this command to set the policy to copy an ADOM object.

Syntax

execute fmpolicy copy-adom-object <adom> <category> <key> <device> <vdom>

Variable	Description
<adom>	Enter the name of the ADOM.
<category>	Enter the name of the category in the ADOM.
<key>	Enter the name of the object key.
<device>	Enter the name of the device.
<vdom>	Enter the name of the VDOM.

fmpolicy install-config

Use this command to install the configuration for an ADOM.

Syntax

execute fmpolicy install-config <adom> <device_id> <revname>

Variable	Description
<adom>	Enter the name of the ADOM.
<device_id>	Enter the device id of the ADOM.
<revname>	Enter the revision name.

fmpolicy print-adom-database

Use this command to display the device database configuration for an ADOM.

Syntax

execute fmpolicy print-adom-database <adom_name> <output_filename>

fmpolicy print-adom-object

Use this command to display the device objects.

Syntax

execute fmpolicy print-adom-object <adom_name>

execute fmpolicy print-adom-object <adom_name> <category> {all | list} <output>

execute fmpolicy print-adom-object Global <category> {all | list} <output>

Variable	Description
<adom_name>	Enter the name of the ADOM or “Global”.
<category>	Enter the category name.
{all | list}	all: Show all objects. list: Get all objects.
<output>	Output file name (output dump to file: [/tmp/pl]).

fmpolicy print-adom-package

Use this command to display the package for an ADOM.

Syntax

execute fmpolicy print-adom-package <adom> <template_name> <package_name> <category_name> <object_name> [<output>]

Variable	Description
<adom>	Enter the name of the ADOM or “Global”.
<template_name>	Enter the policy package/template name.
<package_name>	Enter the package name ID.
<category_name>	Enter the category name.
<object_name>	Show object by name. all: Show all objects. list: Get all objects.
[<output>]	Output file name (output dump to file: [/tmp/pl]).

fmpolicy print-adom-policyblock

Use this command to display the policy block for an ADOM.

Syntax

execute fmpolicy print-adom-policyblock <adom> <policy_block_name> <category_name> <object_name> <output>

Variable	Description
<adom>	Enter the name of the ADOM or “Global”.
<policy_block_name>	Enter the policy block name ID.
<category_name>	Enter the category name.
<object_name>	Show object by name. all: Show all objects. list: Get all objects.
<output>	Output file name (output dump to file: [/tmp/pl]).

fmpolicy print-device-database

Use this command to print the device database configuration.

Syntax

execute fmpolicy print-device-database <device_name> <output>

Variable	Description
<device_name>	Enter the name of the device.
<output>	Output file name (output dump to file: [/tmp/pl]).

fmpolicy print-device-object

Use this command to display the device objects.

Syntax

execute fmpolicy print-device-object <device_name> <vdom> <category> {<key> | list | all} <output>

Variable	Description
<device_name>	Enter the name of the device.
<vdom>	Enter the VDOM name.
<category>	Enter the category name.
{<key> | list | all}	all: Show all objects. list: Get all objects.
<output>	Output file name (output dump to file: [/tmp/pl]).

fmpolicy promote-adom-object

Use this command to promote an ADOM object.

Syntax

execute fmpolicy promote-adom-object <adom> <category> <key> <new-key>

Variable	Description
<adom>	Enter the name of the source ADOM.
<category>	Enter the name of the category in the ADOM.
<key>	Enter the name of the object key.
<new-key>	Enter the name of the new key.

fmpolicy upload-print-log

Use this command to upload the latest print command logs to a server.

Syntax

execute fmpolicy upload-print-log [ftp|scp|sftp] <server> <port> <path> <user> <passwd>

Variable	Description
[ftp|scp|sftp]	Enter the type of server to upload the logs to.
<server>	Enter the server IP address or DNS.
<port>	Enter the port number (0 for default).
<path>	Enter the path on the server.
<user>	Enter the username.
<passwd.	Enter the user's password.