web-spam
Use the following commands to configure FortiGuard antispam related settings.
web-spam fgd-setting
Use this command to configure FortiGuard run parameters.
Syntax
config fmupdate web-spam fgd-setting
set as-cache <integer>
set as-log {all | disable | nospam}
set as-preload {enable | disable}
set av-cache <integer>
set av-log {all | disable | novirus}
set av-preload {enable | disable}
set av2-cache <integer>
set av2-log {all | disable | noav2}
set av2-preload {enable | disable}
set eventlog-query {enable | disable}
set fgd-pull-interval <integer>
set fq-cache <integer>
set fq-log {all | disable | nofilequery}
set fq-preload {enable | disable}
set linkd-log {enable | disable}
set max-client-worker <integer>
set max-log-quota <integer>
set max-unrated-size <integer>
set restrict-as1-dbver <string>
set restrict-as2-dbver <string>
set restrict-as4-dbver <string>
set restrict-av-dbver <string>
set restrict-av2-dbver <string>
set restrict-fq-dbver <string>
set restrict-wf-dbver <string>
set stat-log-interval <integer>
set stat-sync-interval <integer>
set update-interval <integer>
set update-log {enable | disable}
set wf-cache <integer>
set wf-dn-cache-expire-time <integer>
set wf-dn-cache-max-number <integer>
set wf-log {all | disable | nourl}
set wf-preload {enable | disable}
config server-override
set status {enable | disable}
config servlist
edit <id>
set ip <ipv4_address>
set ip6 <ipv6_address>
set port <integer>
set service-type {fgc | fgd | fsa}
end
end
end
|
Variable |
Description |
|---|---|
|
as-cache <integer> |
Antispam service maximum memory usage, in megabytes (maximum = physical memory-1024, 0 = no limit, default = 300). |
|
as-log {all | disable | nospam} |
Antispam log setting:
|
|
as-preload {enable | disable} |
Enable/disable preloading the antispam database into memory (default = disable). |
|
av-cache <integer> |
Antivirus service maximum memory usage, in megabytes (100 - 500, default = 300). |
|
av-log {all | disable | novirus} |
Antivirus log setting:
|
|
av-preload {enable | disable} |
Enable/disable preloading antivirus database to memory (default = disable). |
|
av2-cache <integer> |
Antispam service maximum memory usage, in megabytes ( physical memory to 1024, 0 = no limit, default = 800). |
|
av2-log {all | disable | novirus} |
Outbreak prevention log setting:
|
|
av2-preload {enable | disable} |
Enable/disable preloading outbreak prevention database to memory (default = disable). |
|
eventlog-query {enable | disable} |
Enable/disable record query to event-log besides fgd-log (default = disable). |
|
fgd-pull-interval <integer> |
FortiGuard pull interval setting, in minutes (1 - 1440, default = 10). |
|
fq-cache <integer> |
File query service maximum memory usage, in megabytes (100 - 500, default = 300). |
|
fq-log {all | disable | nofilequery} |
Filequery log setting:
|
|
fq-preload {enable | disable} |
Enable/disable preloading the filequery database to memory (default = disable). |
|
linkd-log {alert | critical | debug | disable | emergency | error | info | notice | warn} |
Linkd log setting:
|
|
max-client-worker <integer> |
Maximum workers to use for TCP client connections (0 - 16, 0 = use CPU count, default = 0). |
|
max-log-quota <integer> |
Maximum log quota setting, in megabytes (100 - 20480, default = 6144). |
|
max-unrated-size <integer> |
Maximum number of unrated site in memory, in kilobytes(10 - 5120, default = 500). |
|
restrict-as1-dbver <string> |
Restrict system update to indicated antispam(1) database version (character limit = 127). |
|
restrict-as2-dbver <string> |
Restrict system update to indicated antispam(2) database version (character limit = 127). |
|
restrict-as4-dbver <string> |
Restrict system update to indicated antispam(4) database version (character limit = 127). |
|
restrict-av-dbver <string> |
Restrict system update to indicated antivirus database version (character limit = 127). |
|
restrict-av2-dbver <string> |
Restrict system update to indicated outbreak prevention database version (character limit = 127). |
|
restrict-fq-dbver <string> |
Restrict system update to indicated file query database version (character limit = 127). |
|
restrict-wf-dbver <string> |
Restrict system update to indicated web filter database version (character limit = 127). |
|
stat-log-interval <integer> |
Statistic log interval setting, in minutes (1 - 1440, default = 60). |
|
stat-sync-interval <integer> |
Synchronization interval for statistic of unrated site in minutes (1 - 60, default = 60). |
|
update-interval <integer> |
FortiGuard database update wait time if not enough delta files, in hours (2 - 24, default = 6). |
|
update-log {enable | disable} |
Enable/disable update log setting (default = enable). |
|
wf-cache <integer> |
Web filter service maximum memory usage, in megabytes (maximum = physical memory-1024, 0 = no limit, default = 600). |
|
wf-dn-cache-expire-time |
Web filter DN cache expire time, in minutes (1 - 1440, 0 = never, default = 30). |
|
wf-dn-cache-max-number |
Maximum number of Web filter DN cache (0 = disable, default = 10000). |
|
wf-log {all | disable | nourl} |
Web filter log setting:
|
|
wf-preload {enable | disable} |
Enable/disable preloading the web filter database into memory (default = disable). |
|
Variables for |
|
|
status {enable | disable} |
Enable/disable the override (default = disable). |
|
<id> |
Override server ID (1 - 10). |
|
ip <ipv4_address> |
IPv4 address of the override server. |
|
ip6 <ipv6_address> |
IPv6 address of the override server. |
|
port <integer> |
Port number to use when contacting FortiGuard (1 - 65535, default = 443). |
|
service-type {fgc | fgd | fsa} |
Override service type. |
web-spam web-proxy
Use this command to configure the web-spam web-proxy.
Syntax
config fmupdate web-spam web-proxy
set address <string>
set mode {proxy | tunnel}
set password <passwd>
set port <integer>
set status {enable | disable}
end
|
Variable |
Description |
|---|---|
|
address <string> |
Enter the web proxy address. |
|
mode {proxy | tunnel} |
Enter the web proxy mode (default = tunnel). |
|
password <passwd> |
If the web proxy requires authentication, type the password for the user name. |
|
port <integer> |
Enter the port number of the web proxy (1- 65535, default = 80). |
|
status {enable | disable} |
Enable/disable connections through the web proxy (default = disable). |
|
username <string> |
If the web proxy requires authentication, enter the user name. |