Fortinet Document Library

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:


Table of Contents

Administration Guide

SAML admin authentication

SAML can be enabled across all Security Fabric devices, enabling smooth movement between devices for the administrator. FortiManager can play the role of the identity provider (IdP) or the service provider (SP) when an external identity provider is available.

Devices configured to the IdP can be accessed through the Quick Access menu which appears in the top-right corner of the main menu. The current device is indicated with an asterisk (this feature is currently only supported in FAZ/FMG).

Logging into an SP device will redirect you to the IdP login page. By default, it is a Fortinet login page. After successful authentication, you can access other SP devices from within the same browser without additional authentication.

Note

The admin user must be created on both the IdP and SP, otherwise you will see an error message stating that the admin doesn't exist.

Caution

When accessing FortiGate from the Quick Access menu, if FGT is set up to use the default login page with SSO options, you must select the via Single Sign-On button to be automatically authenticated.

To configure FortiManager as the identity provider:
  1. Go to System SettingsSAML SSO.
  2. Select Identity Provider (IdP).
  3. In the IdP Certificate dropdown, choose a certificate where IdP is used.
  4. Select Download to get the IdP certificate, used later to configure SPs.
  5. Select Apply.
  6. In the SP Settings table, select Create to add a service provider.
  7. In the Edit Service Provider window:
    • Enter a name for the SP.
    • Select Fortinet as the SP Type.
      • If the SP is not a Fortinet product, select Custom as the SP Type and copy the SP Entity ID, SP ACS (Login) URL, and SP SLS (Logout) URL from your SPs configuration page.
    • Enter the SP IP address.
    • Copy down the IdP Prefix. It is required when configuring SPs.
  8. Select OK.
  9. A custom login page can be created by moving the Login Page Template toggle to the On position and selecting Customize.
To configure FortiManager as a service provider:
  1. Go to System SettingsSAML SSO.
  2. Select Service Provider (SP).
  3. Select Fortinet as the IdP Type.
  4. Enter the IdP IP address and the IdP prefix that you obtained while configuring the IdP device.
  5. Select the IdP certificate.
    If this is a first-time set up, you can import the IdP certificate that you downloaded while configuring the IdP device.
  6. Confirm that the information is correct and select Apply.
  7. Repeat the steps for each FAZ/FMG that is to be set as a service provider.

SAML admin authentication

SAML can be enabled across all Security Fabric devices, enabling smooth movement between devices for the administrator. FortiManager can play the role of the identity provider (IdP) or the service provider (SP) when an external identity provider is available.

Devices configured to the IdP can be accessed through the Quick Access menu which appears in the top-right corner of the main menu. The current device is indicated with an asterisk (this feature is currently only supported in FAZ/FMG).

Logging into an SP device will redirect you to the IdP login page. By default, it is a Fortinet login page. After successful authentication, you can access other SP devices from within the same browser without additional authentication.

Note

The admin user must be created on both the IdP and SP, otherwise you will see an error message stating that the admin doesn't exist.

Caution

When accessing FortiGate from the Quick Access menu, if FGT is set up to use the default login page with SSO options, you must select the via Single Sign-On button to be automatically authenticated.

To configure FortiManager as the identity provider:
  1. Go to System SettingsSAML SSO.
  2. Select Identity Provider (IdP).
  3. In the IdP Certificate dropdown, choose a certificate where IdP is used.
  4. Select Download to get the IdP certificate, used later to configure SPs.
  5. Select Apply.
  6. In the SP Settings table, select Create to add a service provider.
  7. In the Edit Service Provider window:
    • Enter a name for the SP.
    • Select Fortinet as the SP Type.
      • If the SP is not a Fortinet product, select Custom as the SP Type and copy the SP Entity ID, SP ACS (Login) URL, and SP SLS (Logout) URL from your SPs configuration page.
    • Enter the SP IP address.
    • Copy down the IdP Prefix. It is required when configuring SPs.
  8. Select OK.
  9. A custom login page can be created by moving the Login Page Template toggle to the On position and selecting Customize.
To configure FortiManager as a service provider:
  1. Go to System SettingsSAML SSO.
  2. Select Service Provider (SP).
  3. Select Fortinet as the IdP Type.
  4. Enter the IdP IP address and the IdP prefix that you obtained while configuring the IdP device.
  5. Select the IdP certificate.
    If this is a first-time set up, you can import the IdP certificate that you downloaded while configuring the IdP device.
  6. Confirm that the information is correct and select Apply.
  7. Repeat the steps for each FAZ/FMG that is to be set as a service provider.