Fortinet Document Library

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:


Table of Contents

Administration Guide

Display options

The policy and objects that are displayed on the Policy & Objects pane can be customized, and the Policy Packages and Object Configurations tabs can be combined onto a single pane.

To adjust the policies and objects that are displayed, go to Tools > Display Options.

You can turn the options on or off (visible or hidden). To turn on an option, select the checkbox beside the option name. To turn off an option, clear the checkbox beside the option name. You can turn on all of the options in a category by selecting the checkbox beside the category name. For example, you can turn on all firewall objects by selecting the checkbox beside Firewall Objects. You can also turn on all of the categories by clicking the Check All button at the bottom of the window.

Various display options are enabled by default and cannot be turned off.

Once turned on, you can configure the corresponding options from the appropriate location on the Policy & Objects > Object Configurations pane.

Reset all of the options by clicking the Reset to Default button at the bottom of the screen, or reset only the options in a category by clicking the Reset to Default button beside the category name.

To convert the module to a single pane:
  1. Go to System Settings > Advanced > Advanced Settings.
  2. Enable Display Policy & Objects in Dual Pane.
  3. Click Apply.

    The Policy & Objects pane will now be a single pane that includes both tabs.

Display options

The policy and objects that are displayed on the Policy & Objects pane can be customized, and the Policy Packages and Object Configurations tabs can be combined onto a single pane.

To adjust the policies and objects that are displayed, go to Tools > Display Options.

You can turn the options on or off (visible or hidden). To turn on an option, select the checkbox beside the option name. To turn off an option, clear the checkbox beside the option name. You can turn on all of the options in a category by selecting the checkbox beside the category name. For example, you can turn on all firewall objects by selecting the checkbox beside Firewall Objects. You can also turn on all of the categories by clicking the Check All button at the bottom of the window.

Various display options are enabled by default and cannot be turned off.

Once turned on, you can configure the corresponding options from the appropriate location on the Policy & Objects > Object Configurations pane.

Reset all of the options by clicking the Reset to Default button at the bottom of the screen, or reset only the options in a category by clicking the Reset to Default button beside the category name.

To convert the module to a single pane:
  1. Go to System Settings > Advanced > Advanced Settings.
  2. Enable Display Policy & Objects in Dual Pane.
  3. Click Apply.

    The Policy & Objects pane will now be a single pane that includes both tabs.