Fortinet Document Library

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:


Table of Contents

Administration Guide

Syslog Server

Go to System Settings > Advanced > Syslog Server to configure syslog server settings. Syslog servers can be added, edited, deleted, and tested.

If an existing syslog server is in use, the delete icon is removed and the server entry cannot be deleted.

To add a syslog server:
  1. Go to System Settings > Advanced > Syslog Server.
  2. Click Create New in the toolbar. The Create New Syslog Server Settings pane opens.

  3. Configure the following settings and then select OK to create the mail server.

    Name

    Enter a name for the syslog server.

    IP address (or FQDN)

    Enter the IP address or FQDN of the syslog server.

    Syslog Server Port

    Enter the syslog server port number. The default port is 514.

To edit a syslog server:
  1. Go to System Settings > Advanced > Syslog Server.
  2. Double-click on a server, right-click on a server and then select Edit from the menu, or select a server then click Edit in the toolbar. The Edit Syslog Server Settings pane opens.
  3. Edit the settings as required, and then click OK to apply the changes.
To test the syslog server:
  1. Go to System Settings > Advanced > Syslog Server.
  2. Select the server you need to test.
  3. Click Test from the toolbar, or right-click and select Test.

    A confirmation or failure message will be displayed.

To delete a syslog server or servers:
  1. Go to System Settings > Advanced > Syslog Server.
  2. Select the server or servers you need to delete.
  3. Click Delete in the toolbar, or right-click and select Delete.
  4. Click OK in the confirmation box to delete the server or servers.

Syslog Server

Go to System Settings > Advanced > Syslog Server to configure syslog server settings. Syslog servers can be added, edited, deleted, and tested.

If an existing syslog server is in use, the delete icon is removed and the server entry cannot be deleted.

To add a syslog server:
  1. Go to System Settings > Advanced > Syslog Server.
  2. Click Create New in the toolbar. The Create New Syslog Server Settings pane opens.

  3. Configure the following settings and then select OK to create the mail server.

    Name

    Enter a name for the syslog server.

    IP address (or FQDN)

    Enter the IP address or FQDN of the syslog server.

    Syslog Server Port

    Enter the syslog server port number. The default port is 514.

To edit a syslog server:
  1. Go to System Settings > Advanced > Syslog Server.
  2. Double-click on a server, right-click on a server and then select Edit from the menu, or select a server then click Edit in the toolbar. The Edit Syslog Server Settings pane opens.
  3. Edit the settings as required, and then click OK to apply the changes.
To test the syslog server:
  1. Go to System Settings > Advanced > Syslog Server.
  2. Select the server you need to test.
  3. Click Test from the toolbar, or right-click and select Test.

    A confirmation or failure message will be displayed.

To delete a syslog server or servers:
  1. Go to System Settings > Advanced > Syslog Server.
  2. Select the server or servers you need to delete.
  3. Click Delete in the toolbar, or right-click and select Delete.
  4. Click OK in the confirmation box to delete the server or servers.