Fortinet Document Library

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:


Table of Contents

Administration Guide

Enable workflow mode

Workflow mode can only be enabled or disabled from the CLI.

After changing the workspace mode, your session will end, and you will be required to log back in to the FortiManager.

To enable workflow mode:
  1. Go to System Settings > Dashboard.
  2. In the CLI Console widget enter the following CLI commands in their entirety:

    config system global

    set workspace-mode workflow

    end

When workspace-mode is workflow, Device Manager and Policy & Objects are read-only. You must lock the ADOM to create a new workflow session.

Enable workflow mode

Workflow mode can only be enabled or disabled from the CLI.

After changing the workspace mode, your session will end, and you will be required to log back in to the FortiManager.

To enable workflow mode:
  1. Go to System Settings > Dashboard.
  2. In the CLI Console widget enter the following CLI commands in their entirety:

    config system global

    set workspace-mode workflow

    end

When workspace-mode is workflow, Device Manager and Policy & Objects are read-only. You must lock the ADOM to create a new workflow session.