Fortinet black logo

Administration Guide

Monitor SD-WAN

Monitor SD-WAN

After adding the Interface Members, Health-Check Servers, creating SD-WAN templates, and assigning devices to the SD-WAN template, go to SD-WAN > Monitor to monitor the FortiGate devices.

The FortiGate devices can be monitored from two views, Map View and Table View.

To monitor SD-WAN with Map View:
  1. Click Map View to view the SD-WAN link on Google Maps.
  2. Hover over the SD-WAN icon.
  3. The following information is shown:

    Port

    Interface members.

    TX

    Volume of data transmitted.

    RX

    Volume of data received.

    Session

    Number of active sessions.

    Health Check

    Health Check server status.

    Jitter (Actual/Config)

    Actual vs. configured value of Jitter.

    Latency (Actual/Config)

    Actual vs. configured value of Latency.

    Packet Loss (Actual/Config)

    Actual vs. configured value of Packet loss.

To monitor SD-WAN with Table View:
  1. Click Table View to view the SD-WAN link on Google Maps.
  2. The following information is shown:

    Device

    Interface members.

    SD-WAN

    Volume of data transmitted.

    Internet Service 1 Internet Service specified in SD-WAN Rules > Destination type > Internet Service in FortiGate.
    Internet Service 2 Internet Service specified in SD-WAN Rules > Destination type > Internet Service in FortiGate
    Internet Service 3 Internet Service specified in SD-WAN Rules > Destination type > Internet Service in FortiGate
    Internet Service 4 Internet Service specified in SD-WAN Rules > Destination type > Internet Service in FortiGate
    Internet Service 5 Internet Service specified in SD-WAN Rules > Destination type > Internet Service in FortiGate

    Up Stream

    Volume of data transmitted up stream

    Down Stream

    Volume of data transmitted down stream.

    The first row in Table View shows data from the first FortiGate device that connects to FortiManager. Only the first five Internet Services for the first FortiGate device are shown in Table View. The Internet Services for the other FortiGate devices in the table are shown only if they contain one or more of the first five Internet Services shown by the first FortiGate device.

Monitor SD-WAN

After adding the Interface Members, Health-Check Servers, creating SD-WAN templates, and assigning devices to the SD-WAN template, go to SD-WAN > Monitor to monitor the FortiGate devices.

The FortiGate devices can be monitored from two views, Map View and Table View.

To monitor SD-WAN with Map View:
  1. Click Map View to view the SD-WAN link on Google Maps.
  2. Hover over the SD-WAN icon.
  3. The following information is shown:

    Port

    Interface members.

    TX

    Volume of data transmitted.

    RX

    Volume of data received.

    Session

    Number of active sessions.

    Health Check

    Health Check server status.

    Jitter (Actual/Config)

    Actual vs. configured value of Jitter.

    Latency (Actual/Config)

    Actual vs. configured value of Latency.

    Packet Loss (Actual/Config)

    Actual vs. configured value of Packet loss.

To monitor SD-WAN with Table View:
  1. Click Table View to view the SD-WAN link on Google Maps.
  2. The following information is shown:

    Device

    Interface members.

    SD-WAN

    Volume of data transmitted.

    Internet Service 1 Internet Service specified in SD-WAN Rules > Destination type > Internet Service in FortiGate.
    Internet Service 2 Internet Service specified in SD-WAN Rules > Destination type > Internet Service in FortiGate
    Internet Service 3 Internet Service specified in SD-WAN Rules > Destination type > Internet Service in FortiGate
    Internet Service 4 Internet Service specified in SD-WAN Rules > Destination type > Internet Service in FortiGate
    Internet Service 5 Internet Service specified in SD-WAN Rules > Destination type > Internet Service in FortiGate

    Up Stream

    Volume of data transmitted up stream

    Down Stream

    Volume of data transmitted down stream.

    The first row in Table View shows data from the first FortiGate device that connects to FortiManager. Only the first five Internet Services for the first FortiGate device are shown in Table View. The Internet Services for the other FortiGate devices in the table are shown only if they contain one or more of the first five Internet Services shown by the first FortiGate device.