Configuring a dynamic firewall address for a Fabric connector

To configure dynamic firewall addresses for a Fabric connector:

1. Go to Policy & Objects > Object Configurations.
2. In the tree menu, go to Firewall Objects > Addresses.
3. In the content pane, click Create New and select Address.
4. Complete the following options for Microsoft Azure Fabric connectors:

   Address Name	Enter a name for the firewall address object.
   Type	Select Fabric Connector Address.
   SDN	Select the Azure Fabric connector.
   Filter	Enter the name of the filter.

5. Set the remaining options as required, and click OK.