Fortinet black logo

CLI Reference

profile antispam-action

profile antispam-action

Use this command to configure antispam action profiles.

Syntax

config profile antispam-action

edit <profile_name>

set action {discard | domain-quarantine | none | personal-quarantine | reject | rewrite-rcpt | system-quarantine}

set alternate-host {<relay_fqdn> | <relay_ipv4>}

set alternate-host-status {enable | disable}

set archive-account <account_name>

set archive-status {enable | disable}

set bcc-addr <recipient_email>

set bcc-env-from-addr <message_str>

set bcc-env-from-status {enable | disable}

set bcc-status {enable | disable}

set deliver-to-original-host {enable | disable}

set disclaimer-insertion {enable | disable}

set disclaimer-insertion-content <message_name>

set disclaimer-insertion-location {beginning | end}

set header-insertion-name <name_str>

set header-insertion-status {enable | disable}

set header-insertion-value <header_str>

set notification-profile <profile_name>

set notification-status {enable | disable}

set rewrite-rcpt-local-type {none | prefix | replace | suffix}

set rewrite-rcpt-local-value <value_str>

set rewrite-rcpt-domain-type {none-prefix | replace | suffix}

set rewrite-rcpt-domain-value <value_str>

end

Variable

Description

Default

<profile_name>

Enter the name of an antispam action profile.

action {discard | domain-quarantine | none | personal-quarantine | reject | rewrite-rcpt | system-quarantine}

Enter an action for the profile.

none

alternate-host {<relay_fqdn> | <relay_ipv4>}

Type the fully qualified domain name (FQDN) or IP address of the alternate relay or SMTP server.

This field applies only if alternate-host-status is enable.

alternate-host-status {enable | disable}

Enable to route the email to a specific SMTP server or relay. Also configure alternate-host {<relay_fqdn> | <relay_ipv4>}.

Note: If you enable this setting, for all email that matches the profile, the FortiMail unit will use this destination and ignore mailsetting relay-host-list and the protected domain’s tp-use-domain-mta {yes | no}.

disable

archive-account <account_name>

Type the email archive account name where you want to archive the spam.

Enable archive-status {enable | disable} to make this function work.

For more information about archive accounts, see antispam url-fgas-exempt-list.

archive-status {enable | disable}

Enable to allow the archive-account <account_name> function to work.

disable

bcc-addr <recipient_email>

Type the blind carbon copy (BCC) recipient email address.

This field applies only if bcc-status is enable.

bcc-env-from-addr <message_str>

Specify an envelope from BCC address. In the case that email is not deliverable and bounced back, the email is returned to the specified envelope from address instead of the original sender. This is helpful when you want to use a specific email to collect bounce notifications.

This field applies only if bcc-env-from-status is enable.

bcc-env-from-status {enable | disable}

Enable to specify an envelope from address.

disable

bcc-status {enable | disable}

Enable to send a BCC of the email. Also configure bcc-addr <recipient_email>.

disable

deliver-to-original-host {enable | disable}

Enable to deliver the message to the original host.

disable

disclaimer-insertion {enable | disable}

Enable to insert disclaimer.

disable

disclaimer-insertion-content <message_name>

Specify the content name to be inserted.

default

disclaimer-insertion-location {beginning | end}

Insert the disclaimer at the

beginning

header-insertion-name <name_str>

Enter the message header key. The FortiMail unit will add this text to the message header of the email before forwarding it to the recipient.

Many email clients can sort incoming email messages into separate mailboxes, including a spam mailbox, based on text appearing in various parts of email messages, including the message header. For details, see the documentation for your email client.

Message header lines are composed of two parts: a key and a value, which are separated by a colon. For example, you might enter:

X-Custom-Header: Detected as spam by profile 22.

If you enter a header line that does not include a colon, the FortiMail unit will automatically append a colon, causing the entire text that you enter to be the key.

Note: Do not enter spaces in the key portion of the header line, as these are forbidden by RFC 2822.

See header-insertion-value <header_str>.

header-insertion-status {enable | disable}

Enable to add a message header to detected spam.

See header-insertion-value <header_str>.

disable

header-insertion-value <header_str>

Enter the message header value.

Message header lines are composed of two parts: a key and a value, which are separated by a colon. For example, you might enter:

X-Custom-Header: Detected as spam by profile 22.

If you enter a header line that does not include a colon, the FortiMail unit will automatically append a colon, causing the entire text that you enter to be the key.

Note: Do not enter spaces in the key portion of the header line, as these are forbidden by RFC 2822.

See header-insertion-name <name_str>.

notification-profile <profile_name>

Type the name of the notification profile used for sending notifications.

notification-status {enable | disable}

Enable sending notifications using a notification profile.

disable

rewrite-rcpt-local-type {none | prefix | replace | suffix}

Change the local part (the portion of the email address before the '@' symbol, typically a user name) of the recipient address of any email message detected as spam.

none: No change.

prefix: Enter to prepend the part with new text. Also configure rewrite-rcpt-local-value <value_str>.

suffix: Enter to append the part with new text. Also configure rewrite-rcpt-local-value <value_str>.

replace: Enter to substitute the part with new text. Also configure rewrite-rcpt-local-value <value_str>.

none

rewrite-rcpt-local-value <value_str>

Enter the text for the option (except none) you choose in rewrite-rcpt-local-type {none | prefix | replace | suffix}.

rewrite-rcpt-domain-type {none-prefix | replace | suffix}

Change the domain part (the portion of the email address after the '@' symbol) of the recipient address of any email message detected as spam.

none: No change.

prefix: Enter to prepend the part with new text. Also configure rewrite-rcpt-domain-value <value_str>.

suffix: Enter to append the part with new text. Also configure rewrite-rcpt-domain-value <value_str>.

replace: Enter to substitute the part with new text. Also configure rewrite-rcpt-domain-value <value_str>.

none

rewrite-rcpt-domain-value <value_str>

Enter the text for the option (except none) you choose in rewrite-rcpt-domain-type {none-prefix | replace | suffix}.

Related topics

profile antispam

profile antispam-action

Use this command to configure antispam action profiles.

Syntax

config profile antispam-action

edit <profile_name>

set action {discard | domain-quarantine | none | personal-quarantine | reject | rewrite-rcpt | system-quarantine}

set alternate-host {<relay_fqdn> | <relay_ipv4>}

set alternate-host-status {enable | disable}

set archive-account <account_name>

set archive-status {enable | disable}

set bcc-addr <recipient_email>

set bcc-env-from-addr <message_str>

set bcc-env-from-status {enable | disable}

set bcc-status {enable | disable}

set deliver-to-original-host {enable | disable}

set disclaimer-insertion {enable | disable}

set disclaimer-insertion-content <message_name>

set disclaimer-insertion-location {beginning | end}

set header-insertion-name <name_str>

set header-insertion-status {enable | disable}

set header-insertion-value <header_str>

set notification-profile <profile_name>

set notification-status {enable | disable}

set rewrite-rcpt-local-type {none | prefix | replace | suffix}

set rewrite-rcpt-local-value <value_str>

set rewrite-rcpt-domain-type {none-prefix | replace | suffix}

set rewrite-rcpt-domain-value <value_str>

end

Variable

Description

Default

<profile_name>

Enter the name of an antispam action profile.

action {discard | domain-quarantine | none | personal-quarantine | reject | rewrite-rcpt | system-quarantine}

Enter an action for the profile.

none

alternate-host {<relay_fqdn> | <relay_ipv4>}

Type the fully qualified domain name (FQDN) or IP address of the alternate relay or SMTP server.

This field applies only if alternate-host-status is enable.

alternate-host-status {enable | disable}

Enable to route the email to a specific SMTP server or relay. Also configure alternate-host {<relay_fqdn> | <relay_ipv4>}.

Note: If you enable this setting, for all email that matches the profile, the FortiMail unit will use this destination and ignore mailsetting relay-host-list and the protected domain’s tp-use-domain-mta {yes | no}.

disable

archive-account <account_name>

Type the email archive account name where you want to archive the spam.

Enable archive-status {enable | disable} to make this function work.

For more information about archive accounts, see antispam url-fgas-exempt-list.

archive-status {enable | disable}

Enable to allow the archive-account <account_name> function to work.

disable

bcc-addr <recipient_email>

Type the blind carbon copy (BCC) recipient email address.

This field applies only if bcc-status is enable.

bcc-env-from-addr <message_str>

Specify an envelope from BCC address. In the case that email is not deliverable and bounced back, the email is returned to the specified envelope from address instead of the original sender. This is helpful when you want to use a specific email to collect bounce notifications.

This field applies only if bcc-env-from-status is enable.

bcc-env-from-status {enable | disable}

Enable to specify an envelope from address.

disable

bcc-status {enable | disable}

Enable to send a BCC of the email. Also configure bcc-addr <recipient_email>.

disable

deliver-to-original-host {enable | disable}

Enable to deliver the message to the original host.

disable

disclaimer-insertion {enable | disable}

Enable to insert disclaimer.

disable

disclaimer-insertion-content <message_name>

Specify the content name to be inserted.

default

disclaimer-insertion-location {beginning | end}

Insert the disclaimer at the

beginning

header-insertion-name <name_str>

Enter the message header key. The FortiMail unit will add this text to the message header of the email before forwarding it to the recipient.

Many email clients can sort incoming email messages into separate mailboxes, including a spam mailbox, based on text appearing in various parts of email messages, including the message header. For details, see the documentation for your email client.

Message header lines are composed of two parts: a key and a value, which are separated by a colon. For example, you might enter:

X-Custom-Header: Detected as spam by profile 22.

If you enter a header line that does not include a colon, the FortiMail unit will automatically append a colon, causing the entire text that you enter to be the key.

Note: Do not enter spaces in the key portion of the header line, as these are forbidden by RFC 2822.

See header-insertion-value <header_str>.

header-insertion-status {enable | disable}

Enable to add a message header to detected spam.

See header-insertion-value <header_str>.

disable

header-insertion-value <header_str>

Enter the message header value.

Message header lines are composed of two parts: a key and a value, which are separated by a colon. For example, you might enter:

X-Custom-Header: Detected as spam by profile 22.

If you enter a header line that does not include a colon, the FortiMail unit will automatically append a colon, causing the entire text that you enter to be the key.

Note: Do not enter spaces in the key portion of the header line, as these are forbidden by RFC 2822.

See header-insertion-name <name_str>.

notification-profile <profile_name>

Type the name of the notification profile used for sending notifications.

notification-status {enable | disable}

Enable sending notifications using a notification profile.

disable

rewrite-rcpt-local-type {none | prefix | replace | suffix}

Change the local part (the portion of the email address before the '@' symbol, typically a user name) of the recipient address of any email message detected as spam.

none: No change.

prefix: Enter to prepend the part with new text. Also configure rewrite-rcpt-local-value <value_str>.

suffix: Enter to append the part with new text. Also configure rewrite-rcpt-local-value <value_str>.

replace: Enter to substitute the part with new text. Also configure rewrite-rcpt-local-value <value_str>.

none

rewrite-rcpt-local-value <value_str>

Enter the text for the option (except none) you choose in rewrite-rcpt-local-type {none | prefix | replace | suffix}.

rewrite-rcpt-domain-type {none-prefix | replace | suffix}

Change the domain part (the portion of the email address after the '@' symbol) of the recipient address of any email message detected as spam.

none: No change.

prefix: Enter to prepend the part with new text. Also configure rewrite-rcpt-domain-value <value_str>.

suffix: Enter to append the part with new text. Also configure rewrite-rcpt-domain-value <value_str>.

replace: Enter to substitute the part with new text. Also configure rewrite-rcpt-domain-value <value_str>.

none

rewrite-rcpt-domain-value <value_str>

Enter the text for the option (except none) you choose in rewrite-rcpt-domain-type {none-prefix | replace | suffix}.

Related topics

profile antispam