profile mail-routing
Use this command to configure email routing profiles, including MTA advanced control.
Syntax
config profile mail-routing
edit <profile_name>
config entry
edit <id_entry>
set recipient-pattern <string>
set relay-to-host <string>
set relay-to-port <integer>
set relay-type {host | mx-lookup | mx-lookup-matched-domain | relay-host}
set sender-pattern <string>
next
end
next
end
|
recipient-pattern <string>
|
Enter the recipient pattern.
|
|
|
relay-to-host <string>
|
Enter a pre-defined relay host.
|
|
|
relay-to-port <integer>
|
Enter the SMTP port number.
|
25
|
|
relay-type {host | mx-lookup | mx-lookup-matched-domain | relay-host}
|
Set the relay type:
-
host: Relay matched session to specified SMTP server.
-
mx-lookup: Query the DNS server’s MX record of a domain name you specify for the
FQDN or IP address of the SMTP server.
If there are multiple MX records, FortiMail will load balance
between them.
-
mx-lookup-match-domain: Relay through the MX record lookup of the matched recipient domain.
-
relay-host: Relay to a pre-defined relay host.
|
host
|
| sender-pattern <string> |
Enter the sender pattern. |
|
