Upgrading a FortiAP device

Use this procedure to upgrade the firmware on one or more FortiAP devices.

FortiLAN Cloud downloads the firmware to the FortiAP device.

During a FortiAP firmware upgrade, there is a service interruption because the FortiAP device needs to reboot.

Procedure steps

1. In the Menu bar, click Access Points.
2. In the Navigation pane, click Edit View.
3. To set the firmware upgrade for a single FortiAP device:
   1. In the table, locate the FortiAP device that you want to upgrade. Click on the AP Actions tab and select Upgrade Firmware.
   2. Select the build and schedule.
   3. To save changes, click Apply.
4. To set the firmware upgrade for multiple FortiAP devices:
   1. In the table, select checkboxes for all the FortiAP devices that you want to upgrade.
   2. Click Edit Configuration > AP Actions > Upgrade Firmware.
   3. For each FortiAP device, select the build and schedule.
   4. To save changes, click Apply.