Add a single subnet
Before adding a subnet, go to Heatmap View in FortiIPAM to find an available subnet. After targeting a set of available subnet, record down the subnet. And go back to List View to add the subnet.
- From List View, click Add Subnet drop down menu and select Single Add.
- In Add Single Subnet view, enter the IP address and CIDR. The CIDR represents the network suffix, any number between 0 to 32.
For example, to add the subnet 192.168.1.0/24, enter 192.168.0.1 to the Address field, and then add 24 to the CIDR field.
- The number of IPs and Net Mask will be updated accordingly as you entered the CIDR.
From the example above, the subnet 192.168.1.0/24 will provide 256 IP addresses and has a netmask of 255.255.255.0.
- Click the drop down menu in Choose Destination and select a group folder to add the subnet.
- Click Add Subnet to finish adding the subnet.
