Fortinet Document Library

Version:

Version:

Version:


Table of Contents

Administration Guide

Download PDF
Copy Link

Configuring a DNS filter profile

Once a DNS filter is configured, it can be applied to a firewall policy.

To configure DNS Filter profile in the GUI:
  1. Go to Security Profiles > DNS Filter and click Create New, or edit an existing profile.
  2. Configure the settings as needed.

  3. Click OK.
To create or configure DNS Filter profile in the CLI:
config dnsfilter profile
    edit "demo"
        set comment ''
        config domain-filter
            unset domain-filter-table
        end
        config ftgd-dns
            set options error-allow
            config filters
                edit 2
                    set category 2
                    set action monitor
                next
                edit 7
                    set category 7
                    set action block
                next
                ...
                edit 22
                    set category 0
                    set action monitor
                next
            end
        end
        set log-all-domain enable
        set sdns-ftgd-err-log enable
        set sdns-domain-log enable
        set block-action redirect
        set block-botnet enable
        set safe-search enable
        set redirect-portal 93.184.216.34
        set youtube-restrict strict
    next
end
To apply DNS Filter profile to the policy in the GUI:
  1. Go to Policy & Objects > Firewall Policy and click Create New, or edit an existing policy.
  2. In the Security Profiles section, enable DNS Filter and select the DNS filter.

  3. Configure the other settings as needed.
  4. Click OK.
To apply DNS Filter profile to the policy in the CLI:
config firewall policy
    edit 1
        set name "Demo"
        set srcintf "port10"
        set dstintf "port9"
        set srcaddr "all"
        set dstaddr "all"
        set action accept
        set schedule "always"
        set service "ALL"
        set utm-status enable
        set inspection-mode proxy
        set logtraffic all
        set fsso disable
        set dnsfilter-profile "demo"
        set profile-protocol-options "default"
        set ssl-ssh-profile "deep-inspection"
        set nat enable
    next
end

Configuring a DNS filter profile

Once a DNS filter is configured, it can be applied to a firewall policy.

To configure DNS Filter profile in the GUI:
  1. Go to Security Profiles > DNS Filter and click Create New, or edit an existing profile.
  2. Configure the settings as needed.

  3. Click OK.
To create or configure DNS Filter profile in the CLI:
config dnsfilter profile
    edit "demo"
        set comment ''
        config domain-filter
            unset domain-filter-table
        end
        config ftgd-dns
            set options error-allow
            config filters
                edit 2
                    set category 2
                    set action monitor
                next
                edit 7
                    set category 7
                    set action block
                next
                ...
                edit 22
                    set category 0
                    set action monitor
                next
            end
        end
        set log-all-domain enable
        set sdns-ftgd-err-log enable
        set sdns-domain-log enable
        set block-action redirect
        set block-botnet enable
        set safe-search enable
        set redirect-portal 93.184.216.34
        set youtube-restrict strict
    next
end
To apply DNS Filter profile to the policy in the GUI:
  1. Go to Policy & Objects > Firewall Policy and click Create New, or edit an existing policy.
  2. In the Security Profiles section, enable DNS Filter and select the DNS filter.

  3. Configure the other settings as needed.
  4. Click OK.
To apply DNS Filter profile to the policy in the CLI:
config firewall policy
    edit 1
        set name "Demo"
        set srcintf "port10"
        set dstintf "port9"
        set srcaddr "all"
        set dstaddr "all"
        set action accept
        set schedule "always"
        set service "ALL"
        set utm-status enable
        set inspection-mode proxy
        set logtraffic all
        set fsso disable
        set dnsfilter-profile "demo"
        set profile-protocol-options "default"
        set ssl-ssh-profile "deep-inspection"
        set nat enable
    next
end