Fortinet Document Library

Version:

Version:

Version:

Version:


Table of Contents

Administration Guide

Download PDF
Copy Link

Creating automation stitches

To create an automation stitch, a trigger event and a response action or actions are selected. Automation stitches can be tested after they are created.

In the GUI, go to Security Fabric > Automation and click Create New. Automation stitches, actions, and triggers are configured in separate dialogs. When creating a stitch, clicking Add Trigger and Add Action displays a list of available triggers and actions, and the option to create a new one.

Once the stitch is configured, a process diagram of the trigger, actions, and delays is displayed.

Tabs on the Automation page

On the Security Fabric > Automation page, there are tabs for Stitch, Trigger, and Action. The Stitch tab is the default view that lists the trigger and actions used in each stitch. Individual triggers and actions can be created or edited in the corresponding tabs.

Click Trigger to view the list of triggers.

Click Action to view the list of actions.

Sample configuration

The following example shows how to configure a Security Rating Summary automation stitch with AWS Lambda and Email actions.

To configure the automation stitch in the GUI:
  1. Go to Security Fabric > Automation and click Create New.
  2. Enter the stitch name and description.
  3. Configure the trigger:
    1. Click Add Trigger.
    2. Click Create and select Security Rating Summary.
    3. Enter the following:

      Name

      aws_no_delay

      Report

      Security Posture

    4. Click OK.
    5. Select the trigger in the list and click Apply.

  4. Configure the AWS Lambda function action:
    1. Click Add Action.
    2. Click Create and select AWS Lambda.
    3. Enter the following:

      Name

      aws_no_delay

      URL

      Enter the request API URI

      API key

      Enter the API key

      HTTP header

      header2 : header2_value

    4. Click OK.
    5. Select the action in the list and click Apply.
  5. Configure the Email notification action:
    1. Click Add Action.
    2. Click Create and select Email.
    3. Enter the following:

      Name

      email_action

      Delay

      60

      To

      Enter an email address

      Subject

      email action for test

      Replacement message

      Enable

    4. Click OK.
    5. Select the action in the list and click Apply.
  6. Click OK.
To configure the automation stitch in the CLI:
  1. Configure the trigger:
    config system automation-trigger
        edit "aws_no_delay"
            set event-type security-rating-summary
        next
    end
  2. Configure the actions:
    config system automation-action
        edit "aws_no_delay"
            set action-type aws-lambda
            set aws-api-key xxxxxxxxxxxx
            set uri "xxxxxxxxxx.execute-api.us-east-1.amazonaws.com/xxxxxxxxxx"
            set headers "header2:header2_value"
        next
        edit "email_action"
            set description "email action for test"
            set action-type email
            set email-to "test@fortinet.com"
            set email-subject "email action for test"
            set delay 60
            set replacement-message enable
        next
    end
  3. Configure the stitch:
    config system automation-stitch
        edit "aws_no_delay"
            set description "aws action test"
            set trigger "aws_no_delay"
            set action "aws_no_delay" "email_action"
        next
    end

Testing automation stitches

In the GUI, go to Security Fabric > Automation, right-click on the automation stitch and select Test Automation Stitch.

In the CLI, enter diagnose automation test <automation-stitch name>.

Creating automation stitches

To create an automation stitch, a trigger event and a response action or actions are selected. Automation stitches can be tested after they are created.

In the GUI, go to Security Fabric > Automation and click Create New. Automation stitches, actions, and triggers are configured in separate dialogs. When creating a stitch, clicking Add Trigger and Add Action displays a list of available triggers and actions, and the option to create a new one.

Once the stitch is configured, a process diagram of the trigger, actions, and delays is displayed.

Tabs on the Automation page

On the Security Fabric > Automation page, there are tabs for Stitch, Trigger, and Action. The Stitch tab is the default view that lists the trigger and actions used in each stitch. Individual triggers and actions can be created or edited in the corresponding tabs.

Click Trigger to view the list of triggers.

Click Action to view the list of actions.

Sample configuration

The following example shows how to configure a Security Rating Summary automation stitch with AWS Lambda and Email actions.

To configure the automation stitch in the GUI:
  1. Go to Security Fabric > Automation and click Create New.
  2. Enter the stitch name and description.
  3. Configure the trigger:
    1. Click Add Trigger.
    2. Click Create and select Security Rating Summary.
    3. Enter the following:

      Name

      aws_no_delay

      Report

      Security Posture

    4. Click OK.
    5. Select the trigger in the list and click Apply.

  4. Configure the AWS Lambda function action:
    1. Click Add Action.
    2. Click Create and select AWS Lambda.
    3. Enter the following:

      Name

      aws_no_delay

      URL

      Enter the request API URI

      API key

      Enter the API key

      HTTP header

      header2 : header2_value

    4. Click OK.
    5. Select the action in the list and click Apply.
  5. Configure the Email notification action:
    1. Click Add Action.
    2. Click Create and select Email.
    3. Enter the following:

      Name

      email_action

      Delay

      60

      To

      Enter an email address

      Subject

      email action for test

      Replacement message

      Enable

    4. Click OK.
    5. Select the action in the list and click Apply.
  6. Click OK.
To configure the automation stitch in the CLI:
  1. Configure the trigger:
    config system automation-trigger
        edit "aws_no_delay"
            set event-type security-rating-summary
        next
    end
  2. Configure the actions:
    config system automation-action
        edit "aws_no_delay"
            set action-type aws-lambda
            set aws-api-key xxxxxxxxxxxx
            set uri "xxxxxxxxxx.execute-api.us-east-1.amazonaws.com/xxxxxxxxxx"
            set headers "header2:header2_value"
        next
        edit "email_action"
            set description "email action for test"
            set action-type email
            set email-to "test@fortinet.com"
            set email-subject "email action for test"
            set delay 60
            set replacement-message enable
        next
    end
  3. Configure the stitch:
    config system automation-stitch
        edit "aws_no_delay"
            set description "aws action test"
            set trigger "aws_no_delay"
            set action "aws_no_delay" "email_action"
        next
    end

Testing automation stitches

In the GUI, go to Security Fabric > Automation, right-click on the automation stitch and select Test Automation Stitch.

In the CLI, enter diagnose automation test <automation-stitch name>.